LF 12 FIP X MIP SHUTOFF STRT ST BDRS83XR

LF 12 FIP X MIP SHUTOFF STRT ST

The LF 12 FIP X MIP SHUTOFF STRT ST BDRS83XR pressure reducing valve is a triple-stage isolating, reducing and separating device designed for the control of gas, vapor or liquid in a hydraulic fluid power system . The valve has a maximum operating pressure of 10,000 psi at 0°F. The fluid connections are NC and the electrical connections are AP and SO.

The LF 12 FIP X MIP SHUTOFF STREET MARINE SYSTEM

Achieve a leg up on your competition with LF's latest in GI technology. These revolutionary new parts are guaranteed to replace any competitive brand in dimension and weight. The FIP X MIP Shutoff Strainer is manufactured from 17-4 Ph stainless steel, and has a higher nominal burst pressure when used with LFD fluidics.

Our FIP X MIP shutoff valves are designed to identify and prevent Xtra Low (XLP) and High Pressure (HI) conditions. 100% tested at both pressure extremes to verify operation, and all OEM test pressure ratings.

The FlowTronics Corp LF12 FIP-X Micro Inline Pressure Regulator is a low flow inline pressure regulator that offers increased performance, and it prevents surging and over-pressurization issues. This regulator comes with two interchangeable first stage connectors that are compatible with most major portable oxygen concentrators on the market. It features an adjustable flow rate pressure gauge and an easy access Min/Max button to make regulation changes at any time. The LF12 is certified by HCPCS code L3425A for use with Fisher & Paykel Healthcare's Micro90 Series ICON, Siesta2 GoLouder and Micro

The LF12/MIP Air Receiver with Flow & Pressure Control from Little Giant features a brass and stainless steel body construction. The replaceable ball valve is made of noncorrosive materials and features a wide temperature range. For optimal flow control, the ball valve is to be rotated until the desired pressure has been achieved. The shutoff is painted red for easy identification. The air receiver can be mounted on a wall to prevent flooding or in areas where floor space is limited.

For Magnetos, Gensets, and generators that use FIP (Frequency Inverter Controlled) application where the output frequency must be lower than the input frequency. The Shutoff starter is used for applications where it is desirable to shut off the unit, travel to a new location and restart the unit without any memory effect becoming active. For frequency inverters that control generator set alternators such as RVI.