Watts 0009588 Regulator Co. LFN55BM1 3/4" PRV SET AT 50#

LFN55BM1 3/4" 25-75#PresRegult

This 3/4" 25-75# Steel regulator set at 50# is part of Watts Regulator Company's LFN55BM series. This item has a brass body with a black bonnet.

Designed to deliver the same level of performance as conventional gas pressure regulators, but with a smaller package size, the LFN55BM1 Regulator delivers 50# (25-75# pressure range) capability in a compact reg package. This unit has all the functions necessary to satisfy most building codes and applications and is UL/CSA listed.

The LFN55BM1 Series utilizes two basic spring-set faces to regulate water flow through the valves. This pressure-regulating device is designed for use as a general purpose domestic water supply pressure reducing valve for household and institutional installations. Product Features include:

The LFN55BM1 is a Fully Regulated Low-Pressure Setpoint, Solenoid Operated Pressure Relief Valve. It is designed for water-cooled condensing appliances with a pressure regulator, where it is desirable to limit the pressure in the refrigerant circuit to avoid compressor surges and/or loss of capacity due to excessive superheat at start-up and/or power fluctuations during normal operation. (Reference: ASHRAE Standard 41.2-2007, GR-4)

Available in G1/8" (25) 1/2" (50) & G3/4" (75) pressures, the LFN50BM1 series of ball valves incorporate a unique integrated seat assembly for high performance durability. The major components are laser brazed for superior integrity and operation is positive pressure maintenance with the balance spring acting as a self-adjusting trip. Air throttling is possible over the entire range with these large capacity throttling valves.

This Watts® 0009588 Regulator Co. Regulator Valve restores efficient operation of your water heater. Pipe connections on the valve provide durability, and a version specific knob offers easy identification. This 3/4" setpoint regulator is rated for 50 to 75# pressure. It includes 4 ceiling-mounting screws.

Furnace control automatically controls burner pressure to achieve and maintain desired gas pressure within the burner assembly. This variable control is for installation in natural gas furnaces only. It is 3/4" male PRV with Set Point of 50# at 30" WC. Controls a 25-75# pressure range by adjusting the spring tension on both legs of the wafer trip adjustment screw. Flame failure device (FFD) and flame failure limiter (FFL) are recommended when used with a gas valve type regulator to ensure ignition and safe burner function. Output pressure adjustment in 5# increments from 5#-12#-