Carrier 300088 LH31CM035 PILOT/IGN. ASSEMBLY

PILOT/IGN. ASSEMBLY

The Carrier 300088 LH31CM035 pilot assembly is designed to be installed in a Carrier or Payne brand furnace. The gas valve is used to ignite the burner assembly, and the ignitor is used to pre-heat the burners prior to gas ignition. This complete pilot assembly includes the pilot flame rod and...

The Carrier brand Pilot Assembly is used with the Carrier brand Puron gas furnaces. Included with this assembly is the pilot gas valve, pilot burner, thermocouple and electrical wires.

Product DescriptionNatural Gas Side Pilot Igniters, SIngle Phase, 48" Overall Length, 2-3/8" Diameter

Carrier gas pilot assembly. Addressable fire safety and detection controls and sensors are used to protect people, property, and the environment by reducing exposure to fire hazards caused by combustion processes.

The Carrier Pilot Assembly with flame sensor is intended to be used on Pool/Spas Heaters either factory or field installed under the instructions of a Carrier Factory Authorized Service Dealer.

This pilot assembly is designed for Carrier Air Conditioning products.

The Carrier 300088 pilot assembly is used for several different furnaces. When the furnace does not light, or pilot lights and goes out, replace this module. This is a genuine replacement part manufactured by Carrier. To ensure you buy the correct part, or for assistance with installation or troubleshooting, call us toll free at 1-877-216-1845.