A.O. Smith & A.O. Smith 100208512 PULSE TO ANALOG INTERFACE MOD

PULSE TO ANALOG INTERFACE MOD

A

It consists of multiple features that can improve the value when you purchase this item in bulk

Smith 100208512 PULSE TO ANALOG INTERFACE MOD is an upgrade option for the following models of the A

Smith 100208512 PULSE TO ANALOG INTERFACE MOD is a rare item, and can add to any fan of the same type of hardware you already own

The PULSE TO ANALOG MOD converts pulse outputs to 10-bit analog outputs

Smith & A

O

This interface converts a 4-20 mA current-loop signal from the A

This interface board has a factory wiring harness for an easy installation and features industry-standard connectors for input and output signals

Smith 100208512 PULSE TO ANALOG INTERFACE MOD is a good product manufactured by Neuco Inc

Smith® & A

Smith 800 Series water softener to a 0-5 VDC analog signal that can be used by pulse counters, control boards, and other devices with an analog input connector

The A

The 2

Smith 100208512 PULSE TO ANALOG INTERFACE MOD is an Analog Input Board for the PULSE Digital Output Board, which is part of the PULSE Analog Output Board/Coupler Module, which effectively takes a pulse signal from the PLC and converts it into a voltage output that is proportional to the pulse value that was sent from the PLC

Smith Model 65 and 65XL water softener models that feature a 4-wire riser terminal block on the control panel, including the Model 65-1 and 65XL-1

If you wish to know further of this location finding methods, just read its main features below

Smith 100208512 PULSE TO ANALOG INTERFACE MOD is a pulse to analog interface module for use with the A

This is a PULSE TO ANALOG INTERFACE MOD

This Pulse to Analog Interface Module allows for the transmission of pulse signals from a Building Automation System (BAS) to existing residential and commercial building automation systems

The Module converts the 4 pulsing signals from the water softener's control panel into four fully programmable functions for washing machines, dishwashers, or hot tubs that require an analog input such as a dimmer switch or fireplace thermostat control panel

5 mm plug is compatible with most popular water softener brands and includes strain relief to prevent damage to the cable or connector during installation or removal of the interface board

The A

Smith and A

Smith 100208512 PULSE TO ANALOG INTERFACE MOD is an ideal choice for those who have upgraded their original 6 pulse generator controllers to new systems and would like to retain their old system as a back-up or upgrade from older controller/pump combinations, such as: