Watts 50878 Regulator 3/4 M X 3/4 F 30 PSI PRESSURE RELIEF VALVE 510,000 BTU 0342692

3/4" M X 3/4" F 30 PSI PRESSURE REL

The Watts 50878 30 PSI Pressure Relief Valve is a replacement valve that provides protection against overpressure in the fuel system. It has a 30 PSI rating. This 5/8" M X 5/8" F 30 PSI Pressure Relief Valve features an aluminum construction and is designed to withstand in excess of 510,000 BTU.

Contains 3/4" Male X 3/4" Female NPT. 0342692 Regulator Relief Valve Watts Model: 50878, Alt Part: 30-40-01. Sturdy aluminum body with a compact two piece design for mounting flexibility. Integral, Consumable Press Element - Maximum working pressure 250 PSI, Maximum operating pressure 200 PSI. 1" NPT Pipe Size

Uncontrolled pressure relief valves are not recommended for use in the refrigeration industry. Watts recommends the use of a pressure relief valve between the compressor and condenser, which is designed to rupture at a predetermined pressure to protect both components from damage. Watt's range of pressure relief valves are available in sizes from 1/4" M or F to 4"M or F. We offer models with pilot operated shut-offs or gauge operated controls in various pressure settings and equipped with additional safety features engineered for long life and trouble-free operation.

With the Watts Regulator, you'll enjoy consistent water pressure that's perfect for your home. This Watts pressure regulator in chrome features a 30 psi limit, allowing you to control the output of your water heater. It's made from durable brass to last for years to come.

This Watts WYE Regulator controls the flow of LP gas into a hose line. Equipped with a high-performance, solenoid-type pressure regulator to provide accurate regulator output pressure at or below 30 psi (2.1 bar), this accessory is a commonly used replacement for heaters, water heaters, furnaces and boilers. Two Teflon disc seals on the bonnet mate against O-ring seals in the body to provide leak-free performance. The regulating pressure is positively maintained by the use of a spool: When the valve is opened, a built-in spring force moves the sp

The Watts Regulator is a pressure relief valve on the delivery side of a propane regulator. It protects the gas control system against excessive internal back pressure caused by liquid or solid accumulation in the system and serves as protection against an over-pressurization. The #3425-9 and #3426 models are for use with natural gas only. The #3426-2 model is for use with natural gas and propane.

The Watts® Model 51078 is a pressure relief valve which releases pressure to prevent water hammer in the water supply, and is a must for larger, higher capacity wells. This well venting safety device relieves excess well pressure by discharging unwanted water through an attached, air gap-protected discharge line.