Honeywell 12335 Actuator Modulating 4/20ma 90/160 Strk 30/60 Second 150Lb-In Transformer.

120V MODULATING ACTUATOR WITH 60 SE

This 120V Model 12335 Modulating Actuator is ideal for automatic control of garage door openers, sprinkler systems and other applications where a specific range of motion is needed. The actuator has a maximum operating frequency of 30 Hz and a 1-1/2-inch stroke, providing almost 4 in. of travel. With an operating speed range of 0.2 sec to 15 min* and a travel range of 4 in., this motor has applications ranging from garage doors to irrigation systems

Model 12335 is a modulating actuator with 60 second time delay and a proportional 4/20 ma 90-160 VA linear current rating. This unit has been designed for use in power dependent applications, which require a variable speed output and full load current limiting.

This Models 120-volt, 4/20mA output modulating actuator is used to regulate and control pilot-ignited gas or oil burners in the low and moderate output range. The main and auxiliary supply voltages are 32 to 42 VDC (nominal). High thermal capacity allows operation up to the end of fire position with reduction in main and auxiliary voltage.

This is a brand new Honeywell 12335 Actuator Modulating 4/20ma 90/160 Strk 30/60 Second 150Lb-In Transformer

A modulating actuator can be used to control the flow of gas/liquids by varying the opening of a valve mechanically. The Honeywell Actuator is watertight in a NEMA 4X (IP65) enclosure. It comes standard with a 1/4" MNPT inlet for liquid service and a 1/2" MNPT outlet for gas service. The 60 second time delay allows actuation before the valve opens fully, so there is less chance of damaging or over

The 12335 series AC actuator can be operated in two-wire or three- wire applications. A 4-20 mA, constant voltage, and modulating current output is provided. The output level of the AC power to the actuator motor is controlled by three-way selector switch located on the mounting plate of the transducer assembly. These transducers are activated by a 120 Vac, 60 Hz, 1 phase source and a rated power of 150 lb.-in. Transducers have an

The Actuator? Model 12335 is a 120V, 50 Hz, 4/20 mA AC actuator with a wide 0.5 to 3.0 inH2O pressure range and short 0.5 to 3.0 seconds pressure rise time with an all-metal construction and built-in low air bleed linear stroke indicator. The Actuator? Model 12335 is available in output voltages of 24, 36, 72, 120 or 240VAC at various frequencies (