Honeywell 12335 Actuator Modulating 4/20ma 90/160 Strk 30/60 Second 150Lb-In Transformer 641945973273 .

120V MODULATING ACTUATOR WITH 60 SE

The Series 3210 120V Modulating Actuator is designed for use with Series 3200 and 3300 Counter-top/Wall Pot Washer/Dryers, as well as the Series 302 Handleset. The actuator motor delivers heavy duty performance to handle a door up to 200 Lbs. The motor can be mounted in

This device is designed to be used in conjunction with motion detector control of lighting loads. The 120V modulating actuator consists of a magnetically actuated 3 position rotary switch that is operated by a Browning type armature and two coil windings. Control of the lamp load is obtained by energizing the appropriate coil winding in a timed sequence.

The 12335 is a 120 V (50 +/-10%) 60 Hz modulating actuator with 4/20 mA control output and 180 deg non-locking quadrant rotation. Designed for use with 120 V (90 to 160) CA Class 1 or CCC LSIG motor applications, the 12335 has an operating force range of 30 lbs to 150 lbs.

The Honeywell 12335 is a 30/60 Second, 150 Lb-In, 120 V modulating actuator designed for 15 Amps. It has a single method of operation (SPST) and is AC, Modulation only.

Honeywell G9090AA8140A actuator is designed for use in Modulating control circuits and it has 60-second time delay and 150-pound-force magnetic coils.

The Honeywell 12335 Transformer Modulating 90/160 second, 150 lbs-in, 30/60 Second 4/20ma is a device that transforms 4-20mA input signals into low current outputs. The fully potted thermoplastic case is resistant to most harmful chemicals. The device can be installed in series or parallel with other actuators without skewing the actuator performance characteristics. It has three wires for attaching it to a load and four screws for connecting it with external hardware.

These double-pole actuators are designed for use on 90/160 board type heating systems with fully modulating electronic or digital control. The Honeywell 12335 Actuator can be used with either digital, microprocessor, or solid state controls.