Johnson Controls 123831 M9000-610 TandemActuatorAdaptorKitVG2000

TandemActuatorAdaptorKitVG2000

The TandemActuatorAdaptorKitVG2000 converts a rear air suspension tandem actuator system to an air ride system. It is designed for use on vehicles with a rear tandem actuator, equipped with the PN 27000001-01 or -02 assembly. This Adapter Kit has been tested to meet applicable federal motor vehicle safety standards.

The 123831 TandemActuatorAdaptorKitVG2000 is typically used on mid-market Johnson Controls HVACs that utilize either an M9000 or M9060 terminal. This adapter is designed to centralize the actuator for better adjustment.

A paired actuator control is a compact system that includes a joystick-type actuator and a 5-pin NEC connector, which provides variable speed and direction for pneumatic conveying systems. It can be installed in tandem with any other part of the system to provide direct low-level control of flow rate. The TandemActuatorAdaptorKitVG2000 also controls pressure within two acceptable levels.

The Johnson Controls TandemActuatorAdaptorKitVG2000 provides a direct plug-in connection for option 5T or option 5V controls from Johnson Controls. The kit is designed to convert the standard JCI tandem control valve stems on a VG2000 to a direct plug-in for a JCI TandemActuator.

CP100 and CP200 control valves come with a 40mm actuator that can be replaced by using this TandemActuatorAdaptorKitVG2000.

Do you have the DDC-A controller but need to extend the actuator cable? Johnson Controls has the solution with the TandemActuatorAdapterVG2000. Using this adapter, you can extend your actuator cable another 20? without changing out your valve. Valves are available in both 2-way Actuator & 4-way Valve models. The adapters will work with any of the following controller models:

The M9000-610 TandemActuatorAdaptorKit will enable the M-6000T HVAC control to operate on a 3-wire control system, where 2 of the wires are 120V 60Hz ac and 1 is Vacuum. The TandemactuatorAdapter will allow for more remote head room temperature sensing options. Connects one traveler thermostat to two remote thermostats on the same circuit, allowing the 2nd remote thermostat to operate off of vacuum pressure signal.

The Tandem Actuator Adaptor Kit (TAAK) is provided as a means of adapting two M9000-610 tandem actuators to allow for easy installation and superior performance in the drop-forged hanging code applications. It functions as a single 360 degree actuator, and has an output range of 287 to 1,148 lbf (1,230 N-m). The TAAK reduces the number of moving parts and height of the actuator system and includes all fasteners and hardware for an easy installation.

The Johnson Controls M9000 Single Point Tandem Actuator Adaptor Kit allows for a simple and easy conversion from a single point valve to a tandem, double point valve. Installing this kit utilizes the existing actuator inside the 1992 or newer vehicle.

The Johnson Controls® M9000® Tandem Actuator® is designed to allow the OEM to use the vehicle's original door latch handle mechanism for both lock and door ajar interlocks. The product provides a quick-release for actuator pad removal, which will minimize door latch redesign.

Simple to Assemble - Designed to be easy to mount and simple to install, Johnson Controls recommends using its M9000-400 Ladder Mounting Kit (sold separately) to ensure a safe and reliable attachment.

Johnson Controls is the world's leading supplier of intelligent building management systems. Their products and services help save energy, improve environmental performance and create a more comfortable and productive worksite.