Johnson Controls 57157 - 5 - Floating Actuator, 80 Torque

24VAC ELECT. MOTOR; ROTARY ACTUATOR

The Johnson Controls 57157 - 5 - Floating Actuator, 80 Torque is a 24VAC ELECT. MOTOR; ROTARY ACTUATOR. It's part of the Johnson Controls 57157 - 5 product family. The following features are included as part of the 57157 - 5 product family:

The 57157-5 is a floating 24VAC Elect. Motor, Rotary Actuator with 80 Torque & 10 Speed.

The FLOATING ACTUATOR is a 24VAC Elect. Motor/Rotary Actuator combination. The FRAME is made of malleable cast iron and the armature is case hardened. The 5 floating actuators are 4-way with 20 degree site glass, 90 - 10mm bore, 90 deg. bend pipe connections and a .25" square link bar.

The floating actuator by Johnson Controls is a 24VAC Elect. Motor, Rotary Actuator with a torque of 80 in-lbs. It has a 24 VAC input voltage, and the actuator has an end torque of 80 in-lbs.

The 5-PORT DUAL FLOATING ACTUATOR is an 80 torque, 24 Volt AC motor with universal mounting capability. This actuating device provides controlled actuation of two opposing cylinders using only one motor

This Johnson Controls 57157 - 5 - floating actuator for gate valves has a rated torque of 80. The maximum supply voltage is 24VAC. It will weigh 0.74 lb. It has a connecting cable length of 4 feet, sided entry with a 2 pin male connector and a 1" to 3-1/32" lead. This actuator is used with the following valves:

The floating actuator provides controlled actuation in rotating cartridge valves with rotating poppet. It demands alternating positions through the valve angle, so that two positions can be controlled by one handwheel to provide handwheel-actuated position feedback.

This floating actuator is used to provide pilot-controlled service of the pilot valve with the pilot on or off. It features 80 ft·lb torque.

The Johnson Controls 57157 actuator is used for rotation above 80 kicks plus revolution applications. Demand entry.

The Johnson Controls 57157 - 5 - Floating Actuator, 80 Torque limits the travel of the actuator when an overtravel condition is detected. It also provides additional protection against shock loading when used with a back-up switch. Wiring harness not included.

Floating actuator polycentric for switching two water valves. This higher torque actuator is capable of switching a 15" (38cm) valve. The 57157 is the energy efficient choice for applications like pressure reducing valves and recirculating ball valves.

The 5-Series floating actuators are the best-selling product category in Johnson Controls' Modular Actuator™ line. The 5/100 series is used for applications where the spare height is limited. The material of construction is a fully-enclosed, thermoplastic housing. The 5/100 series is designed to provide multi-application versatility and superior durability in a wide range of industrial and commercial HVAC equipment.