Johnson Controls 117814 24V DAMPER ACTUATOR 20NM SPRING RET

24V DAMPER ACTUATOR 20NM SPRING RET

Control dampers in heating, ventilation and air conditioning applications with the Johnson Controls 24V DAMPER ACTUATOR 20NM SPRING RET. Its spring return hold-open plate allows for easy assembly and disassembly, while its self-contained operating mechanism includes a motor in the actuator handle. This device operates loads in both forward and reverse with one wire in either direction, the motor magnet is in place in the handle with all connecting wires inside the shaft.

Johnson Controls 117814 24V DAMPER ACTUATOR 20NM SPRING RET

Johnson Controls 117814 24V DAMPER ACTUATOR 20NM SPRING RET Johnson Controls 117814 24V DAMP ACTUATOR 20NM SPRING RET, Dual SC408 SCR & MCB, Contact make: BOURNS, Contacts: 2NO+2NC, Coil Volts: 24VDC, Amps: 10, Resistive Load: 0.05-0.3Watts (Use with Motors < 1HP), Life Cycles: 10Krms

Johnson Controls 117814 24V DAMPER ACTUATOR 20NMSPRING RET

The 24V Damper Actuator 20NM Spring Ret is suitable for a variety of applications including fire protection and locking damper actuator. Its compact design enables it fit into small spaces, and it can also be wall or ceiling mounted.

The 117814 24V damper actuator, 20 NM Spring Ret is manufactured by Johnson Controls. With a one (1) year warranty, this actuator is made for precise movements for actuating dampers 1"-0.4" (25.4 - 10mm) for use with Fan-Tastic Series fan motors.

This 24VDC Damper Actuator is a compact yet ruggedly built, high speed DC motor for dampers, louvers and similar applications of up to 55 lbs. spring load. Model 117814 has a 20Nm (22 Lb-in) spring return. Unit provides protected open and closed circuits through NO (normally open) and NC (normally closed) contacts when in the automatic mode.

The Damper Actuator is a direct drive electro-hydraulic control valve for air doors, dampers and registers. It is a non-contacting solid-state control circuit. The Damper Actuator has a 20Nm spring return and a 20Nm torque motor. It mounts to a standard 3/8" threaded rod.

Johnsons Controls part number 117814 is a Damper actuator product that has a spring tension of 20 Newtons and a stroke distance of 220mm. The operating voltage for this part is 24V DC.

A solenoid valve/actuator is also referred to as a remote control valve... A solenoid valve/actuator typically consists of a plunger... A damper activator is used broadly in building ventilation, automotive radiators, automotive compressors, automotive air conditioners, residential or commercial refrigerator cooling units.

The 15PE2.5-7D is a 0.3-7 lbf (0.14-3.1 Nm) nominal spring constant pneumatic actuator for use with 5/32in (4mm) to 1/4in (6mm) diameter tubing. The 15PE2.5-7D has a typical on-resistance of 25 ohms and is suitable for use with Sealed Combustion Controls Series 600i, 700i, 1500i control systems that have an input of 24 Volts DC or 28 VAC.

Operating Voltage: 5~24V; Static Load Current: 50mA; Operating Distance: 15mm