Johnson Controls 118006 24V DAMPER ACTUATOR 20 NM SR REPLAC

24V DAMPER ACTUATOR 20 NM SR REPLAC

The Johnson Controls 118006 24V DAMPER ACTUATOR 20 NM SR REPLAC is a genuine OEM replacement damper actuator for select Amana and Goodman furnaces. It fits PSC and RISC based models. Compatible models include:

The Johnson Controls 118006 24V Damper Actuator 20 NM SR Replac is in stock in our warehouse.

The Johnson Controls 118006 24 Volt Damper Actuator 20 Nm S/R Replacement is an air damper actuator for heating, ventilating and air-conditioning systems. It has a continuous operating pressure range of 5 psi to 50 psi. It is rated at 20 NM, and a voltage of 24 volts. It comes with a dustproof seal for a durability a

A Johnson Controls V-100 damper actuator that is 20 NM SR. This actuator is for use in the product line of Johnson Controls.

The 118006 is a 24V Damper Actuator manufactured by Johnson Controls. The Johnson Control trademark is internationally recognized and synonymous with quality and durability. This item, part number 118006, was manufactured at: 2006-05-22.

The 24V Damper Actuator (118006) is used with Eaton's Advanced Metering Infrastructure (AMI) panel. The actuator is used to control the opening and closing of dampers that control airflow into an air handling system. For free air installation, this actuator must be used in combination with the 117101 Terminal block (24V, 1 Phase).

The 24V Damper Actuator is used for automatic damping of doors, roof hatches or airflows.

The Johnson Controls 118006 24V damper actuator is used on the Trane and American Standard HVAC products listed below:

This replacement damper actuator is a genuine OEM replacement part for select Johnson Controls duct dampers. Johnson Controls is one of the leading manufacturers of commercial heating and cooling solutions.

Match the perfect damper actuator to your HVAC application by selecting one of four sizes, then choosing right or left, normally closed or normally open. This part is not interchangeable with other manufacturer's products.

The 9150 Series damper actuators are designed for process dampers to provide a wide range of positioning solutions. Applications include HVAC, blowers, fans, variable frequency drives, and cascade dampers. The compact size and high torque make this a replacement solution for lever action or worm gear actuators.