SCHNEIDER ELECTRIC 30017 (Barber Colman) MA-418-500 120vACTUATOR S/R 2-POS w/AuxSw

120V 60 lb-in. TWO-POSITION DAMPER/

This product is used on a residential gas-fired water heater furnaces and welders to help with over-firing. It is a two-position damper, that when the actuator is on, allow additional gas flow when flames are out to suppress the fire and keep a burner from going out during an extended outage. SUITABLE FOR CAMPING/RV, SLEEPING HOUSES AND AUTOMOBILE REPAIRS.

New Schneider Electric 30017 (Barber Colman) MA-418-500 120v 2-Position Actuator w/Aux Switch NEW without retail box This replaces ACTUATOR S/R SCHNEIDER ELECTRIC 30211 (Barber Colman) MA-418-500 120V 3-Position Actuator with Aux Switches, you could replace it on new construction or existing Barber Colman units

Barcol damper actuator is a 120 volt, 2 position control with thermal overload protection that offers both heat and cool sequencing. The actuator includes an insulated shaft for controlling cool air to the space and includes external limit switch mounting provisions. This item requires hard wire connection. Refer to the manual for additional information. Refer to the SCHNEIDER ELECTRIC BULLETIN for applications, wiring diagrams, and other useful information related to this product.

The MA-418-500 damper is a 2-position control designed for use with most incandescent single phase duct heaters. Standard features include a galvanized steel enclosure, 0.5 in. terminals and a 500 watt SSR built-in, 235 VAC. The MA-418-500 is connection capable for both battery backup and auxiliary switching in the event of power loss or failure.

The MA-418-500 Series is a 2 position, normally closed actuator with an auxiliary switch (SEN-PM). The two position damper actuator is used on the Barber Colman 30001 to control the fire doors of a Boiler. This actuator may be used on our High Temperature Actuators (30011 - 30016), High Temperature Recirculating Controller (30020), Low Temperature Actuators (30021 - 30024), Low Temperature Recirculating Cont

The MA418 forms part of a family of actuators produced by Barber-Colman with one or two positions; 220 VAC (see MA-418-220), 24 VDC (see MA-418-24V), and either a through bore unit (MA418™) or fixed bore unit for this size actuator. The large, cast aluminum ENCLOSED SIZE: 5.0" H x 4.0" W x 1.5" D (127mm x 103

The MA 418-500 actuator is both a wafer and a normally closed damper in one compact actuator. The product’s innovative design houses both the type of actuator and the type of damper in just one unit, minimizing installation time and making it more economical. The product is ideally suited for reducing energy costs in swimming pool or spa applications where multiple, separately controlled heaters are required. This particular actuator can be ordered with either four or six conductors or an optional