SCHNEIDER ELECTRIC 15258 MA5213 Invensys 24VAC actuator 2-possition valve application.

24V 2 POSITION SPRING RETURN ELECTR

Our 24VAC 2 Position Spring Return Electromechanical Positioner Assembly is a quality Cast Iron, Cast Steel, Vibration Isolated positioner assembly for industrial and commercial applications requiring 2-Position operation. This 2 Position Electromechanical Positioning assembly is fully Repairable and Supported by Schneider Electric.

The C15258-MA5213 is used in Invensys 24VAC actuator 2 position valve application. The C15258-MA5213 is a 24 VDC, 2 Position (Open and Closed) Spring Return Electromagnetic Actuator.

The MA5213 is an electrohydraulic 24V 2 position valve that has a spring return to off position. The valve provides both positive and negative port connections. It can be used in a variety of applications including water, chemical, mining, power generation and other industrial related functions.

The MA5213 is a 24 volt spring return type actuator. It has two pneumatic bellows available as a 2 position, 3 position or 4 position actuator. The T-piece may be the side entry of the same design as our standard containers.

The Schneider Electric 15258 MA5213 Invensys 24VAC actuator 2-possition valve application is a 24 VAC control valve that fits perfectly with the rest of the Schneider Electric brand. It is a 2-position spring return valve with an actuator which can have up to a total flow velocity of 3 lpm. This product measures by 34 millimeters in diameter, and it comes with an end cap and electrode rod connected together.

The MA5213 2 position, spring return actuator valve is designed for normally closed or normally open two-way and three-way applications. The valve will remain in its set position until manually returned to the neutral (center) position. The valve has a short travel with limited stop mechanism and no latching feature when in "off" positions. The required solenoid (not included) and wiring must be purchased separately.

The MA5213 – 2/2 two-position spring return with integrated 15258 positioner. It is designed to control flows from 3/8 to 1-1/4 in. and has a maximum pressure of 400 psi.