MAMAC
MAMAC TE-703-C-12-B-2 Mamac Sensor Mamac Sensor
The Mamac TE-703-C-12-B-2 sensor is a 12-bit pressure sensor with a 2-wire interface. It is designed for use with the Mamac TE-703-C-12-B-2 pressure controller.
My Account
If you are already registered, please log in.
Create your account and enjoy a new shopping experience.
Create A New Account24'Armored 10Kohm NTC AVG TEMP
The TE-707-B Series flexible averaging temperature sensor is easy to install and features a 24" armored cable. The cable allows you to connect the sensor without having to run wires through or near doorways. The flexible epoxy coating provides a non-flammable, more secure connection that can be used in a variety of applications.
Flexible averaging temperature sensor system with 24'(7.3m) arm in a fiberglass shielded cable, 12-conductor shielded cable with molded 0.220 or 0.040 DIN connector, MTU, for use with the MAMAC TE-707 Series Manifold Mounted Temperature Sensors and Indicators.
The TE-707-B-12-C-2 SYSTEMS is a 12 channel electric armored cable temperature sensors, which is comprised of an NTC Thermistor and sealing RTV silicone. This system comes with an adhesive backing that attaches the sensor to the target surface.
The TE707 is an impulse cable sensor with NTC thermistor and features a high performance 24" spiral cable for larger diameter lines. Designed for use where the temperature at any point along the cable can be measured to calculate the average temperature in any conduit, pipe, or duct. The TE707 is used in a wide variety of applications, including HVAC control systems and building automation systems for temperature measurement and display of average temperature in buildings. The TE707 is compatible with both MAMAC System 1 (MSS1) and System 2 (MSS2)
AVERAGE TEMPERATURE SENSOR, 1/2"-14NPTF connector with -150 deg F to 3,450 deg F Sensor, Bulkhead mountable on 5/8" NPT pipe.
The MAMA TE-707 temperature sensor is 24" long and 10Kohms resistance at 25°C. The NTC probe will read a negative value down to -70°F (-57°C) and a positive value up to 317°F (143°C). The ideal working range is -40 to 280°F (-40 to 138°C).
NTC Thermistor is a kind of thermal resistor whose resistance is linearly proportional to the temperature change. It can be applicable for protecting electrical circuit and providing position signal, etc.