MARS 12200 TURBO 200 MULTI USE CAPACITOR - 2.5/3.0/4.0/5.0/10/20/25 MFD - 370/440VAC

2.5-67.5MFD 440V Capacitor

The MARS® 12200 TURBO 200 MULTI USE CAPACITOR is a Class 2 dielectric high-voltage capacitor suitable for operation at anywhere between 2.5MFD and 67.5MFD, 3 Phase, 440VAC Frequency: 60Hz.

A choice of 2.5, 3.0, 4.0, 5.0, 10, 20, 25 and 67.5mfd aluminum electrolytic capacitors for HVAC motors, electric welding equipment and industrial controls. Provides power factor correction in forced air furnaces and heaters

The MARS 12200 TURBO 200 MULTI USE CAPACITOR is a 2.5MFD 440v MOV (Voltage Ripple Suppresser) application capacitor that is 92mm x 98mm. It can be used for low voltage power supplies, frequency converters, and high current motor controls, all of which require ripple current suppression. Available at Mouser Electronics

This is a 200mfd 370VAC (2.5mfd 440VAC) X2 6KVAC high voltage Multifuse Capacitor.

A 2.5MFD to 25MFD cap may be the only component needed to start or repair an induction or low voltage motor, and can replace as many as over a hundred resistors, diodes, relays or other complicated multi-component electromechanical starters in many applications. These capacitors are designed to replace many of the hybrid ceramic and fiber capacitors that have been used in industry for the last several years. Most of the manufacturers of these hybrids were acquired by instrumentation companies like AMETEK and are no longer being marketed to industrial OEMs or replacements part suppliers.

The MARS SERIES 200 MFD 370/440VAC 1 Phase is induction ready and is available in: 2.5/3.0/4.0/5.0/10/20/25 MFD 370/440VAC, Transient Voltage Ratings:

The Turbo 200 MULTI USE is a 5 Minute 200 MFD 370/440VAC. Multi-section, Polypropylene Dielectric, PTC rated and in house tested at 3kVAC to insure unmatched performance in industry. 26 mils thick (standard is 30 mils) and 15% greater capacity than competitive products for longer run times. This capacitor is ideally suited for all industrial applications such as pool and spa, motors/generators, concrete counter top mixers, lathes, mills, lights/fixtures and more. This product was designed with the professional in mind.