MARS 43343 10/25 Fixed Low Pressure Cut Out Peanut Switch Auto Reset 20PS003MA025E010E

LOW PRESS.SWT.25#CI 10#CO

The Mars Peanut Switches are low pressure cut out switches that work in conjunction with a relay to handle higher pressures than the cut out pressure of the switch. The relay calls for power from an additional source, (12 volts) when a low pressure has been reached. When power is available, the relay cuts the power lines to the process. Because of this when the pressure reaches the cut-out pressure of 20# CI (10# DA), relays to ground if there is no power provided by a 12 volt source. This avoids any damage to other components in the machine such as motor windings, turbo charger and

The Mars Low Pressure Cut-Out Switch is manufactured from an open short p.t.m. silicone bronze shearwound coil that is of EN-71 approved quality and pressure tested for safety. This 10# Auto reset (43343 Series only) switch has a tight spring tolerance and a low starting pressure of 10 pounds to actuate, as well as a U.L./C.U.L. approval.

This 43343 Low Pressure Cut Out Assembly is an electronic pressure switch assembly designed to monitor a refrigerant line. A motor will automatically turn on when the pressure inside the line reaches the set point. The pump will run until the low pressure switch closes, signaling that the system has been restored to normal operation. This 10/25 psi model will activate at 10 psi and turn off at 25 psi. This is an auto reset low pressure cut out kit that comes with instructions and mounting hardware for mounting.

The 43343 Fixed Auto Reset Low Pressure Cut Out PEANUT SWITCH . This Auto Reset Peanut Switch is used in compressed air, natural gas and propane gas systems. The 43343 offers the reset peanut design for quick installation and serviceability. It also features a 1/4" female flare fitting with two pipe threads for mounting purposes.

The 43343 10/25 Fixed Low Pressure Cut Out is a cutout pressure switch designed for use with oil fired heating appliances. This automatic reset device is set to trip at 25# (translating to 20 PSIG). The 43343 10/25 Fixed Low Pressure Cut Out Peanut Switch Auto Reset is a suitable replacement for the following brands:     435/66, 47777, 53731, 555/66, 80421-MA025E010E (8004-MA025E010E)

The MARS 43343 10/25 Fixed Low Pressure Cut Out Peanut Switch Auto Reset 20PS003MA025E010E is an electric safety device designed for use in liquid propane/ natural gas lines. The switch may be installed on residential and commercial LP / natural gas appliances, including boilers, cooking ranges, clothes dryers, fireplaces and others.

The Mars 43343 is used as a Low Pressure Cut Out for connecting to refrigeration and air conditioning equipment. It works with refrigerant cycles in R410a (16 oz), R-22 (12 oz), R134a (10 oz) and R407c (7 oz).