MAXITROL
Maxitrol 325-5L600-3/4 "3/4"" 325-5LX ATTACH TO OPD600"
"3/4"" 325-5LX ATTACH TO OPD600"
My Account
If you are already registered, please log in.
Create your account and enjoy a new shopping experience.
Create A New Account"1"" 325-5LX ATTACHED TO OPD600"
The Maxitrol 325-5L600-1 "1"" 325-5LX ATTACHED TO OPD600" "1"" 325-5LX ATTACHED TO OPD600" has a maximum flow of 600 gpm at pressures to 250 psig and 225 gpm at pressures up to 200 psig. It can be used in almost any hydraulic application. The pump is made up of two pieces, a seal kit and a modular single suction motor assembly, with the seal kit connecting directly to the vertical axis (OPA), Maxitrol motor-seal kits incorporate the best S
The Maxitrol 325-5LX A/C thermostat is next generation modeling for 5,000, 1"" 325-5LX ATTACHED TO OPD600" and 6,000 BTU units. This model has a 2-hour factory set delay allowing the installation contractor enough time to properly size and install the equipment. The Maxitrol Attached Package option allows contractors to order the packaged supply and attached casing together which eliminates adding this to an existing order saving time and money.
The Maxitrol 325-5LX DeltaV controller converts the output of a standard central air system into two independently controlled, balanced, full-range airflow zones. With 1"" 325-5LX connected to OPD600" each zone provides up to 600 CFM of airflow.
The OPD600 is designed for use with the Maxitrol 325-5LX gas valve. This replaces the 175-11LX valve and 325-5L600-2 control pressure regulator with an additional 600 psi differential Delta Pressure gauge. It also provides a threaded outlet port for attachment of the 1"" 325-5LX and an additional 1"" 200-50LX.
650-600 OHM ATTACHED TO THERMOSTAT OP650T 14-1/2"" SQUARE APX.
Works with OPD600 equipped units to allow remote ON/OFF and status indication of attached unit. Provides +24V DC power for applications requiring constant on operation.
The Maxitrol 325-5LX series of visible sensor photoelectric flame detectors are designed for the detection of fires in hazardous areas classified as Division 1, Zone 0, Class I. The detector lamp's Field of View is 140° H x 90° V and is used with a Paragon SunShield®.