KMC/KREUTER 102257 DIRECT COUPLED DAMPER ACT. 15 SEC. / 45 DEGREE 24

DIRECT COUPLED DAMPER ACT. 15 SEC. / 45 DEGREE 24

KREUTER 102257 DIRECT COUPLED DAMPER ACT. 15 SEC. / 45 DEGREE 24 IS A SPECIAL EXTERNAL SOLENOID VALVE FOR THE DIRECT COUPLING OF A GAS OR AIR FLOW INTO THE OUTPUT FLUE GAS TOWER (E.G. INDUCTION FURNACE, HEAT RECOVERY) IN ORDER TO ACHIEVE ACCURATE AND ADAPTABLE PHASE-LAG CONTROL IN

This damper actuator set is designed for use with the KREUTER (KMC) 24 VDC control board, and is appropriate for use with applications requiring a direct-coupled damper application. With its 15 second reaction time and 45 degree deflection, this damper actuator will keep your application running efficiently. Direct coupled means it is actuated by the motor via a shaft directly attached to the actuator, no intermediate levers or other hardware required. Visit our website at

The KREUTER series of dampers offers high performance damper regulation in a compact, indirect design. Designed for small to medium commercial building applications, the Series 102257 15 second damper provides precise temperature control over critical indoor spaces. This model is direct coupled and features a 15 second time delay at 45 degree opening angle. For ease of operation, the damper actuating lever is conveniently located below the spigot handle, and easily removed from its out-of-the-way mount

With the KREUTER direct coupled damper actuator you can precisely control the damping of drive and braking forces. With the integrated 45° angle movement, an extremely fast opening response can be achieved. You simply connect the damper actuator to the spindle of a servo and regulate the opening time.

KREUTER direct coupled damper actuators: range of applications for building automation and process control, speed and accuracy are guaranteed in all applications, range of stroke and switching functions meet all requirements for ventilation applications

The KREUTER 102257 Direct Coupled Damper Actuator is a relative-thickness type damper with a screw-organized connection. It consists of the following parts: - Control plate, - Actuating shaft made from stainless steel, - One control ring (with same diameter as operating shaft), - Work ring, - One cylinder, material made of aluminum or stainless steel with behind sealing lip on both sides. 5 years warranty

With this 102257 damper actuator from KMC/Kreuter you can switch between direct coupled and re-circulated cooling air. The damper actuator is suitable for rooms with a heating power of 100 to 2500 W, ensuring that your room always stays pleasantly comfortable.