Honeywell 10631 Floating. 24V 50/60Hz. 45 To 90 Deg Stro

ACTUATOR

Honeywell - ACTUATOR

The Honeywell 10631 Floating 24V 50/60Hz 45deg TO 90 deg Stroke Actuator is a part of the C3 Series, which is designed to control a variety of dampers for your home or office. They are easy to install and offer increased airflow while conserving energy. It also features a large range - temperature and humidity-sealing adjustment options, and it can be used in variable-air-volume systems. Change vents with this Actuator.

The Floating Wall Actuator is an actuator for attaching to wall mounted valves. This device has a 3-wire design and works with both 45-90 degree angle actuators. It is small, lightweight, and compact. It also contains stainless steel shell, EPDM rubber gasket, and a sealed ball valve.

The Honeywell 10631 Floating Actuator is a 24 VAC, 45 To 90 Deg Stroke, Normally Open Automating Valve. The Valve has a maximum pressure rating of 450 PSI at 100 deg F.

A one piece, rigid, float switch for use on low voltage heaters and pumps. The float consists of a single material molded in a bulbous shape; no moving parts. Factory set at 45mm (1-3/4?) above the mounting flange. Float is 316 stainless steel with nickel titanium nitride plating. Contact is aluminum bronze and factory set at 54 mm (2 1/8?). Integral pressure relief button at 30mm (1-5/16?) prevents contact from sticking if heater or pump cycles off during start-up.

Our new line of floating two-way solenoid valves feature a unique float trip mechanism that offers both instantaneous and non-instantaneous control, allowing the valve to operate as a normally closed or as a normally open valve. The float trips the normally closed spool from above the solenoid coil, allowing flow through the center port when the water level rises past its predetermined setting. This design allows for precise control even with turbulent water conditions.

The Honeywell 10631 Float Switches are designed for use in many commercial/industrial applications and deliver better performance at a lower cost. The sensor comes complete with an aluminum mounting bracket, SPST float switch and a pole switch cover. Their compact size allows them to be used in confined areas.