Honeywell 11270 , Inc. Pneumatic Damper Actuator, Spring Range: 5-10 psi

PNEUMATIC DAMPER ACTUATOR 5-10 PSI

The Honeywell 11270 is a pneumatic damper actuator that provides 5 to 10 psi.

The Honeywell 11270 is a Damper Actuator that is designed for a 5-10 PSI range. It has a square flange of 0.786 inches, the frame diameter is half of an inch, and it has 4 electrical terminals. The length of this Damper Actuator is 3.11 inches and it is designed with a pneumatic actuator. It is rated at 1.5 watts, 115/230VAC single phase, and 120VA.

This actuator can be used to remotely control a heating or cooling forced air system. For this reason, it´s used in buildings where the DDC-equipped heating and central cooling units are required to be installed in limited spaces. This Pneumatic Damper Actuator is a direct replacement for Honeywell System Sensors to replace the System Sensor 767A1008 and 767A1009 pneumatic actuators.

Honeywell Pneumatic Actuator 11270 . This Pneumatic Damper Actuator is designed to control the supply of Air in both Commercial HVAC and Residential HVAC systems. Its mechnical construction has been specifically chosen for long term reliability. This part was manufactured using the most up to date engineering techniques, utilizing a sound design and material quality, to produce a pneumatic damper actuator that is second to none.

When you own a home, choosing the best energy saving products for your home is truly important. Honeywell strives to help you do this by offering easy to use, effective energy saving solutions that are made in the USA and are easy on your pocketbook. With a Honeywell Pneumatic Damper Actuator you can reduce your monthly heating and cooling costs by increasing ventilation in and out of your home or office with minimal effort.

The Honeywell 11270 is a spring range pneumatic actuator that operates between 5 and 10 psi output. It can be used in applications including: local ventilation dampers, fan coil dampers, and other components requiring accurate control. In addition to the dry PTFE piston, this actuator features a compact design to maximize limited space applications, integrated mounting tabs for easy installation, and ball-style end connections for easy service. This actuator is designed for use with oil-temperature rated wire rope and bores at least ¾".

The vacuum actuator 11270 is a light-duty pneumatic damper actuator that is suitable for operating valves with 10 in. of head, at max psi of 10. The internal spring range is 5 psi to 10 psi. It includes an integral filter and a filter adapter to attach to all standard 1-in side inlets (not included)