Honeywell 98686 5-10 PSI PNEUMATIC DAMPER ACTUATOR REPLACES MP909A

5-10 PSI PNEUMATIC DAMPER ACTUATOR REPLACES MP909A

The Honeywell 5-10 PSI Pneumatic Damper Actuator replaces the MP909A. It is a low-voltage controller that can be used to control dampers in heating and air-conditioning systems, ventilation and exhaust systems, fan coils, hydronic radiant heating systems and more.

Honeywell 98686 pneumatic damper actuator replaces MP909A. This pneumatic damper actuator has a 5-10 psi range, 22 gpm (90 l/Min) maximum flow and 12-28 Vdc maximum control voltage.

This 5-10 psi pneumatic damper actuator will replace Honeywell model MP 0909A, P/N 98686. The Honeywell P/N is stamped on the side of the old actuator, but can also be found on the original packaging. This damper actuator is used on many brands and models of ductless mini split air conditioner units, furnaces, boilers, furance products including Bryant, Carrier, Rheem, Ruud, Lennox and Friedrich.

The Honeywell 98686 universal pneumatic damper actuator is designed for controlling roof ventilators and other fully-enclosed, gravity controlled dampers. The damper can be used for retrofit applications or new construction using R-7 or R-11 unfaced insulation. The 98686 replaces PASCO MP909A and has a range of 5–10 PSI with 0.5 PSI increments.

The Honeywell 98686 5-10 PSI Pneumatic Damper Actuator replaces the 909A series. This device has a control loop for variable speed compressors and other pneumatic equipment. It provides reliable control of airflow and is ideal for temperature control in industrial filters, greenhouse fans, fogger nozzles, humidifier systems and medical supplies such as nebulizers or oxygen concentrators.

Need a pneumatic damper actuator? The Honeywell 98686 is what you're looking for. This product is a 5-10 PSI pneumatic damper actuator. We carry thousands of parts and components like this in our warehouse, so if you can't find it on our website, call us at 866.606.3991 for assistance.

Simple to operate and easy to install, Ball Mount® Pneumatic Damper Actuator is a low cost and versatile solution for HVAC damper actuation from 5 to 10 psi (4.75 to 7.5 cfm). Replace expensive electronic or mechanical actuators with this reliable pneumatic actuator that provides proven ball-bearing reliability in harsh environments. Also check out our new pneumatic damper actuators: The Ball Mount 2 and Ball Mount 3.