Honeywell 11297 , Inc. Pneumatic Damper Actuator, High Force, 3.5 in. stroke.

PNEUMATIC PISTON OPERATOR 3-13 PSI

This heavy duty pneumatic piston operator is constructed of cold rolled steel for durability and has a high force design to deliver up to 3.5in stroke and 13psi. This air damper actuator is designed for use on gas furnace burners 90,000 - 160,000 BTU/hr, for manual or automatic modulating applications with external pilot valve. This listing is for one (1) air dam per listed specifications

Our Actuator is a quick-action pneumatic piston operator with stroke lengths from 3.5 to 6.25 inches offering a wide range of load-sensing, force-actuated, and holding force capabilities. It can sense load forces from 3.5 to 13 psi (0.24-0.89 bar), an adjustment that is made without tools during assembly and therefore no critical positioning of parts. All models include an air sleeve that provides a grease seal for all shaft stub bearings.

Simplify your installation with this high-quality, well-built pneumatic piston operator. This compact actuator can be used in a variety of applications and can control any application that requires minimal force to move the actuator arm. The external lever is convenient for use with wall switches and hook and link connection.

The 11297 Pneumatic Damper Actuator is a high force, pneumatic, piston actuator that offers a 3.5 inch stroke. It has an 18/2 size lead wire and is made of plastic. It has an air inlet pressure of 0-13psi and an air outlet pressure of 0-13psi as well. The top coil design allows it to be used on style 32 honeywell dampers.

A high force actuator with a 3.5 in. stroke for high volume, low pressure pneumatic systems. The 11297 is capable of 10.6 lbs of thrust force and a full stroke of 3-13 psig. It can protect critical equipment by closing an opening against potential damage. A small compact size makes it easy to mount without significant space consumption, while the design of the mechanism allows for use in confined spaces or on difficult mounting surfaces.

Honeywell's PNEUMATIC DAMPERS apply force to a moving assembly using a pneumatic piston actuator. Installed as hydraulic dampers in many industries, they are available in different end configurations, stroke lengths and line pressures

The HONEYWELL 11297, Inc. Pneumatic Damper Actuator with high Force is designed for use with dampers, louvers, and Sun Shades made by PCE, Inc. and other leading manufacturers.