Honeywell 11315 MP953E1376 "8"" DA 4-11# NoAirStemUp 5#POS."

PNEUMATIC VALVE ACTUATOR ASSEMBLY 8

Honeywell 11315 MP953E1376 Pneumatic Valve Actuator Assembly 8" Diameter Fit Valve: 5-way 1/2" FNPT. This Pneumatic Valve Actuator Assembly is designed to meet the requirements of most gas applications.

This pneumatic valve actuator assembly includes an 8 inch seat height valve with a 4 to 11 psi pressure range, a replaceable body and an air stem up indicating section (5 psi) and an air stem down indicating section (11 psi). For mounting on air distribution panels.

Fixed orifice square tube body with "Y" port at valve end. Normally closedn(NC) and Normally openn(NO) pneumatic valves No air stem up (Non-rotary) - Type BA) Pneumatic Valve Actuator Assembly 8 MP953E1376 BCM Series BCM 11P15D/265-A 4-11# No air stem up (Non-rotary)

This Pneumatic Valve Actuator Assembly includes the Valve Body and handle, yoke and stem, Spring and Actuating Rod, Air Line Connector, Adapter and Screws.

The Honeywell 11315 is a Pneumatic Valve Actuator Assembly used in smoke detectors for detector air pressure, this assembly is small, strong and lightweight.

The Honeywell 11315 manufactured by Randall Mfg. Corp is a pneumatic valve actuator assembly part of the F124PA series Air Switches Actuators. The Honeywell 11315 has important characteristics: Normally open/Normally closed; Normally opens when air supply is present, and closes when air supply is interrupted. Maximum pressure of 10 PSIG to 30 PSIG, Signal type: Molded strain gauge; HONEYWELL MICRO SWITCH PNEUMATIC AIR VALVE ACTUATOR ASSEMBLY

The 11315 Pneumatic Valve Assembly has a 12 volt DC solenoid, a minimum fully-opening force of 15 pounds, and a maximum fully-opening force of 40 pounds. The assembly includes an air stem and an integral 10 foot wire lead with connector for the controller. It measures about 7"" high by 4-7/8"" wide by 2-3/4"" deep.