Bronze check valve for use in commercial and industrial applications. Typical services include; hot and cold water, HVAC, steam, compressed air, gas and other general utility services.
This Nibco bronze check valve is designed for use in commercial and industrial applications. It meets all applicable NSF/ANSI standards for hygiene (taste and odor) and are guaranteed to last. It can be used with a wide range of fluids including steam, gas, compressed air, condensate return lines, hot water heating systems, chilled water lines, HVAC lines, boilers and sanitary waste venting lines.
Protect components in your installations with the NIBco T-413-Y-LF Bronze Non-rising Check Valve. This product, a horizontal swing bronze non-rising check valve, is capable of handling 1/2" (15mm) and 15mm diameter piping and can withstand pressures up to 125PSI (8.6 bar). It features PFA seats for great chemical resistance, and provides leak rates of less than 2 drops per minute at 125 PSI (8.6 bar). Included with the products are gaskets to be used with either cast iron or ductile iron pipe systems.
The NIBCO T-413-Y-LF Bronze Lead-Free Check Valve is an excellent choice for use in commercial and industrial applications. This Check Valve has a bronze body, PTFE seat and stem. It is capable of handling fluids with a temperature range of -40 to 350°F and at pressures up to 4000 psi. The NIBCO T-413-Y-LF has a 1-1/4" female NPT FIPT.
High-conductivity, corrosion-resistant Bronze stem. EPDM rubber gasket with Teflon insert for leakproof tight shutoff. Class 125 service rating, and a 1-1/4" FIPT (Female Iron Pipe Thread) inlet and outlet configuration. The bronze body has been electroplated with copper for superior corrosion resistance.
Designed for commercial and industrial applications, the Nibco lead check valve is constructed of stainless steel for increased durability while a brass disk and stem are utilized to minimize water hammer effects. Control handle options include; spring-loaded spool, ball check or poppet. Check valves are highly flexible in that they close and prevent reverse flow when air pressure is applied in either direction and open when air pressure is removed from the system.
This Nibco check valve features bronze construction for durability and reliable performance. It has a slip-disc design for quiet, leak-free operation with automatic seat adjustment and positive locking. The gasket provides IP68 protection, and the unit is designed to protect against back flow.
This Check Valve is designed for horizontal water flow applications.
Free Shipping
In stock
