Nidec (Secop) 117U4148 Start Relay With Overload

pStart Relay With OverloadppSecop 117U4148 Start Relay With Overload NidecpNidec Secop 117U4148 Start Relay With OverloadpThe Nidec 117U4148 Start Relay With Overload is a lead free component designed for automotive electrical applicationspThe Nidec 117U4148 start relay with overload is the standard replacement The start relay with overload protects your motor by starting, running and stopping it and by preventing it from burning out due to problems such as overcurrent, short circuit or phase reversal The Nidec 117U4148 start relay with overload is also known as the Secop 117U4148 and the Nidec Secop 117U4148 start relaypWith Nidec 117U4148 Start Relay Overload you can prevent overload to electrical system This part is used for generating systems and other industrial equipment It has contacts of AC30A, 10 AMC, 7 AMB, resistance of 18 ohms and 001 AAC at 250 VACpThe 117U4148 start relay, with overload protection, is a standard product for most applications Two terminal connections are made at the units terminals A four phase motor is connected to the relay normally closed contacts NO1 When the voltage applied to the input terminals of the relay is lower than 4V or higher than 36V, the relay will activate and connect the power to the motors NO2 contacts The relays fitted with an overload protector have a thermal protection element that cuts off power if excessive current flows through the overloads motor coilpThe Nidec Secop 117U4148 start relay with overload is a crystalfree NO contact that has a single coil normally closed contact and a double pole, DC rated 24V open collector It has a voltage rating of 5 VDC at 100 mA, a current rating of 130 mA, and contacts rated for 1 A at 60 VAC