Nidec (Secop) 117U6000 COMPRESSOR RELAY

COMPRESSOR RELAY

The COMPRESSOR RELAY 117U6000 is a single phase compressor disconnect device used to disconnect the compressor from power in the event of a loss of power and for turning off the compressor for maintenance purposes. The contact block part is incorporated with Class B relays and will cut out the main contacts according to the command from the microcomputer. The controls cover ranges from two stages to eight stages, and it's can be PCB mounted with one process cable.

The Nidec (Secop) 117U6000 Compressor Relay is a DC compressor contactor with 1NO and 1NC contacts rated 10A at 250VAC. The relay is normally open on make and normally closed on break, according to the Coincident Contacts principle.

Nidec Secop 117U6000 Compressor relay This High quality Nidec Secop 117U6000 Compressor relay is available for same day shipping. Nidec Secop range of products are suitable for use in many applications including office equipment, medical and laboratory instruments, avionic and telecommunications equipment, clinical analyzers and various household appliances.

The Nidec (Secop) 117U6000 compressor relay is a solid-state, single pole device designed for isolation of air conditioning or refrigeration compressors. It consists of a single pole on/off mercury contact relay that is used between the compressor and the ignition transformer or solenoid switch. The 117U6000 mounts on a standard DIN rail, complies with NEC 2008, UL497 standard & ANSI/NFPA 70.

Nidec Secop 117U6000 is a two-channel compressor relay for 120V split system air conditioners and heat pumps. It has a starting current rating of 0.2A, and a holding current of 0.15A, and is stamped with CE mark and PSE mark. This motor control can operate up to 1/2 HP compressor motor at 115V usage voltage, and comes with a screw terminal box and the components that are required for wire connections.

117U6000 is a compressor relay. A compressor relay connects a compressor to an air-conditioning system to control the air flow and eventually the temperature of the air. The heat resistors are connected in parallel to stabilize the current between them. A capacitor is used on this relay as a noise filter during defrosting cycles. For further information, please consult your Carrier or Bryant service manuals.

The Nidec (Secop) 117U6000 is a compressor relay that has been designed for both household and commercial refrigeration applications. This specific model features overload protection, power overload protection, over temperature protection and momentary contact.

Power Switch for Compressor Protection

Our 117U6000 relay is a member of the 116 series, which comes with a long warranty period. This high-performance series is packed full of features and comes at an affordable price—making it perfect for your automation solution! With this item you will also receive a six-month warranty.

The 117U6000 is a super compact, miniature variable-reluctance magnetic contactor designed to work with 1 phase of high voltage, 4-wire power supply. It has mainly been used for electric motor (AC), household electrical appliances and automobiles as a control means for A/C refrigeration compressor. This relay employs inbuilt stand-by power circuitry with optional external standby power source, so that it can be directly applied to the

The Nidec 117U6000 Relay can handle AC-50Hz and DC-60Hz with a frequency of 30MHz.