US MOTORS 5441H 1/4 - 1/6 HP, 1075 RPM, , 208-230 V, 60 HZ, 4

1/4 - 1/6 HP, 1075 RPM, 5441H, 208-230 V, 60 HZ, 4

US MOTORS 5441H 1/4 - 1/6 HP, 1075 RPM, 208-230 V, 60 HZ, 4.5 gal per minute flow rate 1/4" NPT (RIGHT HAND THREAD) minimum water pressure required for best operation. This is a self-priming pump made from cast iron with aluminum mounting brackets and a baked enamel finish.

The US MOTORS 1/4 - 1/6 HP, 1075 RPM, , 208-230 V, 60 HZ, 4 SPEED BELT DRIVE MOUNTED CIRCULAR / SABER SAW is an affordable wet saw for small worksites. This machine will perform a variety of cutting tasks. It can be used to cut wood or PVC pipe having a maximum diameter of 1-1/8". This saw is compact in size and easy to move from job site to job site with the integrated transportation wheels.

A 1/4 to 1/6 HP, 1075 RPM, , 208-230 V, 60 HZ, 4 HP motor is available for convenience and speed of operation. It is designed with the pulley on the left which helps in its fast operation. It has a built-in capacitor for longer run time and has a wire wound rotors for sturdiness and long life. This heavy duty electric motor has a heat-resistant steel housing and sealed ball Bearings to offer superior performance for years

This is the 1/4-1/6 HP, 1075 RPM, 5441H Universal Motor. This motor is typically used as a replacement motor that can be mounted into any one of our existing enclosures.

Designed for residential and commercial applications, the U.S. Motors 5441H is up to the task of providing outstanding performance and value to accommodate almost any application with 1/4-1/6 HP, 1075 RPM, induction motor. This brand new motor is a must have for any garage or work site that demands durability and power. The 4-inch mounting foot makes this motor easy to install into any wall/ table mounting system.

This direct drive, permanently lubricated motor delivers 1/4 - 1/6 HP at 1075 RPM to meet the needs of many HVAC and pumping applications. It can be used in a wide variety of applications including Heat Pumps, Pool Pumps, Fire Sprinklers, Residential & Commercial Air Conditioning Units, Fans and much more.

The 5441H, 1/4 hp, 115/230V, 60Hz, 1725 RPM motor is included with the U.S. Motors UM-2B belt drive lathe and is a direct replacement for the UM2C motor. Classified as NEMA U (waterproof) the motor conforms to NEMA standards and carries a 3 year warranty. The CS1 control panel is also included and allows the motor to be wired for 115 or 230 VAC. Original equipment manufacturers of new lathes must use components of the same type number for their products to be covered under warranty.