Nordyne 624662R Discharge Temperature Sensor

Discharge Temperature Sensor

This Nordyne 624662R Discharge Temperature Sensor is a part of the indoor air quality system and is compatible with various Nordyne products. It is designed to detect discharge temperature of the system and to prevent compressor from starting if discharge temperature exceeds the set value. It consists of sensor, actuator and wiring harness.

The Nordyne 624662R Discharge Temperature Sensor is designed to fit the Nordyne 624662R Air Conditioning Condensing Unit. Resistant to corrosion and abrasion, this sensor ensures that your air conditioner runs at optimal efficiency. It is designed to work with the Nordyne 624662R and provides a discharge temperature of 25°C (77°F).

The Nordyne 624662R Discharge Temperature Sensor is a part that is suitable for use with Nordyne products. The sensor prevents compressor damage when the outdoor temperature drops below freezing. It is designed for use with chilled water systems and can be used in both residential and commercial applications.

The Nordyne 624662R Discharge Temperature Sensor helps Nordyne air conditioners maintain optimum operation performance. This temperature sensor is designed for use with these Nordyne products: 2B20-5, 2B50-5, 2B100-5 and 3SX90.

The Nordyne 624662R Discharge Temperature Sensor is the replacement sensor for you Nordyne residential air conditioning system. The sensor has a high temperature and low temperature cutoff that prevents the compressor from running if the discharge temperature is too high or too low.

The Nordyne 624662R Discharge Temperature Sensor is a genuine OEM part. The Discharge Temperature Sensor is for use with models 500-K and 700-L, Series 1000 General Purpose Air Cooled Chillers, Series 1240 and 1500 Room Air Cooled Chillers.

This list of features is for the Nordyne 624662R Discharge Temperature Sensor.

Discharge Temperature Sensor 624662R fits Nordyne P5C, P5C-1, P5C-2, and P5C-4 model furnaces.

The Nordyne 624662R Discharge Temperature Sensor is a replacement part for the following furnace models: RPLS090(0.90), RPLS091(0.91), and RPLS092(0.92). It is compatible with gas furnaces and has a voltage rating of 24 volts DC. The temperature range for the discharge sensor is between 100 and 210 degrees Fahrenheit, while it's operating range (load) is between 30% and 100%. The length of the discharge sensor, excluding the connectors, measures 1 inch while its width measures 0.5 inches.

When the wiring or thermal switch on your air conditioning system fails, the coils can overheat and catch fire. That's why it's important to check for signs of failure and replace any worn components before it's too late. Identify wiring problems early with this quick check: turn off the power to your compressor, unplug the unit and remove the discharge temperature sensor from the condenser coil. Connect an ohmmeter between terminal 1 and terminal 2. Set the meter on its highest scale (usually 500). A reading of 0 ohm indicates a resistance in excess of 2200 ohm, a sign that you need to replace your sensor.