Robinair ROB-34065 R-134a Oil Injector with 1/2" Acme Fitting.

R-134a Oil Injector with 1/2? Acme Fitting

Robinair ROB-34065 R-134a Oil Injector with 1/2?

This robinair R 134a Oil Injector with 1/2? Acme Fitting has a steel bonnet, piston and an aluminum alloy cylinder, which removes the risk of rusting

Each size has 2000 PSI working pressure and 3000 PSI burst pressure

It is available in four capacities: 4 oz

The Robinair ROB-34065 has a flow rate of 30 grams per minute

The automatic pressure switch activates when it reaches 300 psi output, providing precise control of the system

, 32 oz

Warning: This part should only be used for the repair or replacement of the original

It is suitable for use with a variety of compressors and refrigerant oils such as POE, mineral and HFC

This prevents the system from going into an overcooling cycle due to excess lubrication in critical areas of the compressor head

This part is made of brass, has a max pressure of 300 psi and a max temperature of 250 degrees fahrenheit

The Robinair ROB-34065 R-134a Oil Injector with 1/2? Acme Fitting is an easy to use and reliable way for automotive technicians to charge air conditioning systems quickly and efficiently

The R-134a Oil Injector with 1/2? Acme Fitting from Robinair is designed for use with the company’s R-134a refrigerant system

The Robinair ROB-34065 R-134a Oil Injector with 1/2? Acme Fitting is a good choice if you want to be sure your air conditioning system isn’t leaking

The R-134a Oil Injector features knurled knobs and a 1/2" NPT fitting

, and 64 oz

This is a brand new R-134a Oil Injector with 1/2" Acme Fitting

The Robinair Oil Injector is a complete oil injection system for R-134a

This unit will inject the refrigerant oil into the a/c system as it charges to lubricate the compressor, condenser fan motor, and all other moving parts

Robinair ROB-34065 Oil Injector with 1/2? Acme Fitting, 1/8? NPT Pressure Gauge and 1/8? NPT Pressure Relief Valve, -35 to 150? F Application

It features a ½" NPT male fitting and an integrated gauge that makes it simple to monitor the pressure of the refrigerant inside the holding tank

Injection

This robinair R134a Oil Injector with 1/2? Acme Fitting is designed to transfer R-134a refrigerant from a storage tank to a vehicle or machine that uses it

The oil injector is used to circulate refrigerant through the system by pumping it from one component to another through hoses and fittings

It will stop the leaks in the system while it is still early

, 16 oz

The oil injector is a precision flow control device that meters the required amount of refrigerant oil into the closed loop compressor discharge line

Comes complete with 1/2? Acme fitting and 5' of tubing