OTC OTC-7649A Tools Fuel Injector Cleaning Kit

Fuel Injector Cleaning Kit

The OTC 7491C Upper Control Arm Knock-out Tool is designed to remove upper control arms

Upper Control Arm Knock-Out Tool, OTC7491C For use with upper control arms manufactured by GM

For use on GM, Ford and Dodge vehicles with or without ABS

Save time and money when you invest in the OTC 7491C Upper Control Arm Knock-out Tool, a proven time saver for small to medium vehicle repair shops

The Control Arm Knock-out Tool is designed for easy removal of the upper control arm and axle shaft nut

The OTC control arm knock-out tool is designed to remove the outer cotter pin from the upper control arms on GM vehicles with a ball joint upper mount

OTC Control Arm Knock-Out Tool for 7491C

OTC 7491C Upper Control Arm Knock-out Tool, 4-1/2" Long

Two different hex sizes are provided for convenience

Upper control arms used by General Motors are held in place on the vehicle chassis by a single bolt that passes through the top of the arm and is fixed to a bracket on the frame rail

This tool easily removes upper control arms from most makes and models, making it a must-have addition to your tool box

The OTC7491C Upper Control Arm Knock-out Tool is a 5" (127mm) long tool, with a 1-1/2" (38mm) diameter to fit over the upper control arm bolt

OTC's 7491C Upper Control Arm Knock-out Tool is an inexpensive, easy-to control tool that removes the upper control arms from the vehicle in one easy step

The 7491C helps technicians complete repairs faster and more accurately, which ultimately can save their clients money

The 5" length of the tool includes a 2-1/8" (54mm) long hex tip for tightening or loosening bolts, nuts or studs in situations where space is limited

This tool is designed to remove this bolt without damage to the vehicle's frame or surrounding components

The tool uses a tapered pin inserted into the hole in the head of a cotter pin

With its lightweight design and ergonomic handle, this tool is well balanced and simple to use

The knock-out punch end is threaded and has a 1/2" hex shank to fit into the 7491C offset ratchet handle

This tool installs on the upper control arm and allows the installers to knock out the old inner bushings

7491C Upper Control Arm Knock-out Tool

OTC 7491C Upper Control Arm Knock-out Tool