OTC OTC7507 (7507) CV Joint Fork Removing Adapter

The OTC 7507 is designed to be used with OTC slide hammer number 1155. It can also be used in conjunction with OTC extension number 7508 or both.

The OTC 7507 is designed to be used with OTC slide hammer number 1155. It can also be used in conjunction with OTC extension number 7508 or both. The assembly consists of the OTC 7507 adapter, RVDT7503-2 remote tester, RVDT7509 valve block and a 16' (4.88m) cable assembly with 3/8" male npt (38.1mm) connector at the end.

The OTC7507 was designed to be used as an adapter only. The socket is attached to OTC slide hammer number 1155.

The OTC7507 (7507) CV Joint Fork Removing Adapter is designed to be used in conjunction with the OTC slide hammer numbers 1155 and 1150, when removing a CV joint from a vehicle axle. The fork adapter attaches to the transmission yoke and allows the fork to engage on the axle's bolts - which hold the CV joint to the transmission.

The OTC 7507 CV Joint Fork Removing Adapter is designed to be used with the OTC Slide Hammer Numbers 1155, 1160 or 1162. The adapter will fit into the trunnion of a vehicle's axle to provide stability during removal and installation of the fork without damaging the CV boot. The Fork Removing Adapter greatly reduces time and effort in servicing these hard-to-reach axle joints.

The OTC 7507 comes with a diameter of 1-1/4". The fork is designed to be used in conjunction with one or two slide hammers. The differentials used are 3/4", 1-1/4", 1-3/4" or 2". The forks have a jaw capacity of 60,000 psi. It is made of steel, and the bore size is 7/8". It has a fixed jaw capacity of 20,000 psi and a sliding jaw capacity of 40,000 psi.

The OTC 7507 CV Joint Fork Removing Adapter is designed to be used with an OTC 670 slide hammer to remove CV joints. The OTC 7507 aligns the axle to the slide hammer and provides clearance for the slide hammer tips. It aids in removal of stubborn lower ball joints and inner/outer CV joints. The OTC 7307CV Joint Fork Removing Adapter features hardened steel construction and is ideal for use in severe service conditions.

With the OTC 7507 CV Joint Fork Removing Adapter comes a pair of 3-prong hooks providing full coverage of the joint. This adds to strength and durability.

The OTC 7507 is designed to be used with OTC slide hammer number 1155. It can also be used in conjunction with OTC extension number 7508 or both.

The OTC 7507 is designed to be used with OTC slide hammer number 1155. It can also be used in conjunction with OTC extension number 7508 or both. The assembly consists of the OTC 7507 adapter, RVDT7503-2 remote tester, RVDT7509 valve block and a 16' (4.88m) cable assembly with 3/8" male npt (38.1mm) connector at the end.

The OTC7507 was designed to be used as an adapter only. The socket is attached to OTC slide hammer number 1155.

The OTC7507 (7507) CV Joint Fork Removing Adapter is designed to be used in conjunction with the OTC slide hammer numbers 1155 and 1150, when removing a CV joint from a vehicle axle. The fork adapter attaches to the transmission yoke and allows the fork to engage on the axle's bolts - which hold the CV joint to the transmission.

The OTC 7507 CV Joint Fork Removing Adapter is designed to be used with the OTC Slide Hammer Numbers 1155, 1160 or 1162. The adapter will fit into the trunnion of a vehicle's axle to provide stability during removal and installation of the fork without damaging the CV boot. The Fork Removing Adapter greatly reduces time and effort in servicing these hard-to-reach axle joints.

The OTC 7507 comes with a diameter of 1-1/4". The fork is designed to be used in conjunction with one or two slide hammers. The differentials used are 3/4", 1-1/4", 1-3/4" or 2". The forks have a jaw capacity of 60,000 psi. It is made of steel, and the bore size is 7/8". It has a fixed jaw capacity of 20,000 psi and a sliding jaw capacity of 40,000 psi.

The OTC 7507 CV Joint Fork Removing Adapter is designed to be used with an OTC 670 slide hammer to remove CV joints. The OTC 7507 aligns the axle to the slide hammer and provides clearance for the slide hammer tips. It aids in removal of stubborn lower ball joints and inner/outer CV joints. The OTC 7307CV Joint Fork Removing Adapter features hardened steel construction and is ideal for use in severe service conditions.

With the OTC 7507 CV Joint Fork Removing Adapter comes a pair of 3-prong hooks providing full coverage of the joint. This adds to strength and durability.