Johnson Controls 3515 SPST PRESSURE CONTROL 50/450# DIFF 60# MAX 36" CAP CONN 13 OPEN 250+/ -5#.

SINGLE POLE HIGH PRESSURE CONTROL W

The Johnson Controls 3515 pressure control is the perfect addition to your Johnson Controls proportional responsive control valve, turning it into a single pole high pressure control valve. It includes 13 open, 250+/-5# full scale adjustment.

This single-pole, high-pressure control valve is designed for non-critical applications and compensates for pressure losses in the system. The maximum pressure is 250 psi at approximately 35 psi

Single pole pressure control switch for air compressor applications requiring a high pressure switch at high altitude, or high rpm applications. Unit may be stacked with other single pole switches without causing pulse bouncing problems.

The 3515 SPST Pressure Control is a single pole, high pressure control that is designed for water, steam or air pressure applications. This 50/450# setpoint maximum pressure control has four combinations of single and double pole presets to make it compatible with numerous situations. The control's max differential, min differential and max flow rates are all adjustable to fit your needs. This PID Pressure Control is a way to keep processes on an even keel.

The 3515 Single Pole Pressure Control is used in conjunction with a flow control device, such as a globe or gate valve, and pressure transmitter to provide proportional control of water system pressure. The 3515 Pressure Control is factory set at 250 psi with a deadband of 5psi. Its reset value is zero (+/-0psi) when it senses 0 (14.7Psi) in the hydraulic line and has a whopping 600:1 Ratio.

The 3515SP pressure control is a pneumatic single pole, high pressure control designed for use with 50–450 psi compressors. It is available to control pressures from 60–80 psi (negative) and 250 plus/minus 5 psi (positive).

Create positive pressure in high temperature ovens. This valve contains an electronic switch that turns ON when the 130°F (54°C) high temperature switch is deactivated. The 3515 (JCB3515) Controls the flow of air to the oven with a normally closed, single pole pressure control. Uses thermocouple coil for high temperature switching, 0-250 PSI (0-17 bar).

Johnson Controls 3515 2-Way Pressure Control Valve operates on 155-250 psi supply pressures and maintains a maximum pressure drop of 60 psi across single or three way valves. The ball check with full bore flow tubes have a total flow of 250 gpm per valve. The valve is direct closed from both pilot and main circuit. It is normally closed with a manual lever using a permanent seat with a spring loaded seat ring holding it in place.

The Johnson Controls 3515 SPST Pressure Control is designed for use on refrigeration equipment type separate high pressure refrigerant compressors that are used with scroll, screw, vane and sleeve valves. This product is ideal for hydrocarbon refrigerants, but can be used on non-hydrocarbon gases if the temperature of the receiving vessel or component is not more than 104°F (40°C).

The Sentron® SPST Pressure Control Valve is designed for use on steam generators of central heating systems operating on low pressure saturated steam.

Achieve control of your tank system with Johnson Controls® pressure controls, which are designed to reduce operating costs, enhance performance and provide maximum energy savings.

The Johnson Controls 40435-0007 pressure controller is used to regulate, control, and stop the flow of liquids under pressure through injection lines.