Packard 40132 3.3 Inch Diameter Motor 115 Volts 1550 RPM

"1/20HP 115V 1550RPM 3.3""DIA"

Packard 1/20HP 115V 1550RPM 3.3""DIA 0.33A PMA Class A Single Cylinder Horizontal Mounted Non-Selection Bearing Pump 40132.

The D40132 motor is a 1/20HP, 115V, 1550RPM, 3.3" in diameter x 5.80" long motor with a built-in pulley and standard shaft with an input voltage of 115V/60Hz, 115V dual voltage. The D40132 has a B5M CWT construction and weighs 2.40 Lbs. The No. 5018 spindle will rotate clockwise when viewed from the shaft end (foot end).

An economical choice for your masonry application, this 1/20 HP 1550 RPM motor is designed for use in most 5 in. and 6 in. bench grinders. It features a 3.3"" diameter for high power output and extended life.

The 3.3"" Diameter Motor 115 Volts 1550 RPM is the perfect replacement for your broken or burned out motor. This motor is easy-to-install and has a 1/20 HP rating.

The 3.3"" Diameter Motor has a 1/20 HP rating and 1550 RPMs. The Motor is non-vented and made of aluminum - the Frame is plastic and weighs 6 lbs. It is 115 volts and single phase powered with a frame efficiency of 54%. The Motor can function in a line voltage single phase, vented or open construction motor'.

The Power Corp. manufactures 3 Phase AC induction motor. The power rating is 1/20HP and 1550 RPM. This 3 phase motor has 3.3"" diameter frame and copper rotor permanent magnet with aluminum wiring system.

The 3.3 Inch Diameter Motor 115 Volts 1550 RPM is an excellent example of technology that does not take up very much room at all.