SCHNEIDER ELECTRIC 30437 (Barber Colman) PC-301 2-POS.AIR FLOW PRESS.SW. SPDT

Two Position Adj. Air Flow Pressure

PC-301-2 2 position adjustable air flow pressure switch Type: SPST N.O. SPDT Applications: Gas Orifice

The PC-301 is non-drip two position air flow pressure switch. The end of life indication has leds for power on and limit status. The switch must have a +24Vdc to operate.

The PC-301 is a 2 position air flow pressure switch in a compact design. It allows for adjustment of the rate of air flow and isolation of start and stop functions. The red air line port connects to the source and the blue line port connects to the gate valve.

When you require a compact, economical air flow pressure switch, the PC-301 is most likely the right choice for your application. The barber-colman 1/4 hp motor fits into 2.5 and 4 inch dia

The ultimate in versatility, double chain fixture with two independent adjustable air flows. Tail piece/choke type design allows for fast and easy changes to be made to the pressure on the dies. This double chain design allows you to adjust the tail pressure while the air flow continues to change allowing you to hold the target load force automatically. Do not use with dies that are harder than carbide or tool steel.

The PC-301 air flow pressure switch is used to start and stop a blower motor as the air pressure drops or rises.

This low pressure sw. is used when fine adjustment of the air flow lb./in. are required. Air flow must be adjusted to within 2% of the actual setting for leak free operation.