OTC OTC-4420 Pilot Bearing Pulling Attachment with Two Pair Jaws.

Pilot Bearing Pulling Attachment

The OTC-4420 replaces the stock flywheel and allows for a much more effective means of removal

This attachment works with two pair of jaws and removes pilot type bearings and bearing retainers

It is specially designed for use on smaller tapered roller bearings, inner rings, side shields, plain end caps, and seals used in the aerospace industry

The Jaws are made of stainless steel and can be used for pilot bearing and crank shafts, taper roller bearings, tapered roller thrust bearings, plain thrust bearing and other similar applications

This tool is used to remove any bearings that can be accessed with a puller, as well as those in difficult to reach areas

OTC-4420 Pilot Bearing Pulling Attachment with Two Pair Jaws is designed for pulling out pilot bearings and highly recommended for OTC-4400G Pilot Bearing Puller

OTC OTC-4420 Pilot Bearing Pulling Attachment with Two Pair Jaws is a great addition to any of your projects, especially in removing bearings from aircraft and military engines

The OTC-4420 Pilot Bearing Pulling Attachment is used to remove and install pilot bearings on engines and transmissions using a 3/8" drifter or 3/8" wrench

Pilot Bearing Pulling Attachment with Two Pair Jaws

OTC-4420 Pilot Bearing Pulling Attachment with Two Pair Jaws

It will pull the bearing out of a double tapered shaft without removing the tapered bushings in between

The 55

If you need to pull a pilot bearing from an engine, you need an OTC OTC-4420 Pilot Bearing Pulling Attachment with Two Pair Jaws

The Pilot Bearing Pulling Attachment allows you to remove bearings using the 4420/4460/4480 OTC Pullers

This is a particularly useful device when it is hard to get to the bearing and there are ears between the bearing and the slide or housing

The Pilot Bearing Puller removes the outer ring from the roller bearing

This product is made in the United States

The OTC-4420 Pilot Bearing Pulling Attachment with Two Pair Jaws is designed for manual puller removal of tapered roller bearings and cylindrical roller bearings

The OTC-4420 Pilot Bearing Pulling Attachment comes complete with two pair jaws and one 1/3" drive adapter

Useful in pulling out pilot bearings out of shafts

The OTC-4420 Pilot Bearing Puller is the most efficient tool for removal of needle roller bearings, internal and external splined shafts, ball bearings and tapered roller bearings

The OTC-4420 bearing pulling attachment has two pair of jaws: one 3 ½” long jaw and another 5 ¾” long jaw

It allows the installer to pull out bearings without damaging their counter bores and it saves time with the ability to use two pair of jaws instead of the standard one pair

5 mm long, 14 mm diameter threaded rod can only be screwed into the puller tip once (without loosening) to ensure that the pilot bearing is firmly held in place while pulling out

This attachment is made of high-quality materials to serve you for years to come

It comes with a durable construction and easy to use features