PLUNGER & BEARING ASSY for Hobart - Part# 00-873851

PLUNGER & BEARING ASSY for Hobart - Part# 00-873851

This contactor ensures that there is a closed circuit when electricity flows through it and it opens when there is not any electricity flowing through it

The contactor has electrical terminals on the back to connect wires from your furnace to the circuit board, which is located inside the furnace

Vulcan Contactors are used where mechanical operation is required, such as in applications involving hoisting, cranes, pumps, or fans

They are used to control the starting and stopping of motors and other equipment

The contactor uses screws to connect the voltage lines to the terminals

CIRCUIT BREAKER

When the burner doesn't need to be on, this part is also used to turn off the power from going through the burner, preventing any unwanted fires or damage

This contactor has a voltage rating of 120 volts and current rating of 3 amps

The Vulcan CONTACTOR3P 30/40A 120V for Vulcan - Part# 00-411497-000C3 is a contactor for Vulcan brand furnaces that can be used with any of the following models: 001116, 001111, and 000207

CONTACTOR3P 30/40A 120V for Vulcan - Part# 00-411497-000C3

Replacement contactor for Vulcan

The Vulcan CONTACTOR3P 30/40A 120V for Vulcan - Part# 00-411497-000C3 is used to operate the burner or burners