Johnson Controls V3000-8011 PNEU VALVE ACTUATOR

PNEU VALVE ACTUATOR

The Johnson Controls V3000-8011 PNEU VALVE ACTUATOR is a replacement for the following: Bryant CG1400-OC, Carrier 58SE3, Lennox X61000. Installation difficulty is medium.

The V3000-8011 Pneumatic Valve Actuator from Johnson Controls is a three-way pneumatic valve actuator that works with standard 0.4 to 1.00" tubing, and offers a compact design with dual electrical inputs.

The Johnson Controls V3000-8011 Pneumatic Servo Valve Actuator has a solenoid valve, which has the ability to modulate between two positions for precise control of your pneumatic valve actuator assembly. This product needs to connect the electric servo motor with the pneumatic actuator.

The V3000-8011 Pneumatically actuated pneumatic valve actuator is designed to provide proportional positioning within the full stroke range for pneumatic equipment. The compact cylinder body (16.5 mm long by 38 mm OD) of aluminum alloy provides better heat dissipation than the steel cylinder of the V3000-8000. This low backpressure pneumatic actuator also features a controlled air intake without a filter, making it suitable for use in high contamination areas where a gas filter cannot be used.

Maximize your compressed air system performance and efficiency with Johnson Controls Pneumatics, Thermal Solutions and Flow Products. Our extensive product line includes the V3000 series valve actuators. Available in 1/8 to 2HP configurations, we also offer a variety of accessories and streamlined kits to help simplify your procurement process.

The Johnson Controls V3000-8011 pneumatic valve actuator is designed to handle 0.5-inch compressed air, 75 psi SPC/SCR, and 50 pcf or lower dry gas pressure. Ideal for use when opening or closing exhaust ports when operating ventilation equipment, the valve features a 1/2-inch NPT outlet, a 2-inch ported coupling body, and a 1-inch ported diaphragm.

This Johnson Controls Pneumatic Valve Actuator is a pneumatic linear actuator designed to provide precise control of an air supply. Our V3000 Series valves are known for their frequency response capabilities and the current models vary from 0.6-18.2 amp (AC)/0.45-10 amp (DC). These Pneumatics can be used in HVAC and other applications that require small linear movements at up to 5,200 psi.

The V3000-8011 is a Honeywell Series 3000 single-acting pneumatic valve actuator. The Series 3000 actuators have an all-stainless steel body with a modular design for lower repair costs and a compact, lightweight thermal overload protection package that is easily replaced in the field.

The V3000 series electronic actuator provides fast, precise, pneumatic control for Johnson Controls' solenoid throttles. This AC-drive line of quiet, cost-effective pneumatic actuators are designed for use in automotive, industrial, process control and building automation applications.

Purposefully designed to provide maximum value and performance, our family of line voltage actuators provides a wide variety of solutions. For instance, if your needs are straightforward, a direct-acting two-way valve may be the best option, where a single- or 3-way multifunction device is required. Or, our adjustable pressure range actuator will let you control the position and/or direction of a large variety of loads including valves, rods, lights and others.

The V3000 Series Four Way Pneumatic Valve is specially designed to control differential pressure between supply and return air ducts. This is accomplished by switching on or off, the flow of supply air to the diffuser section of supply air grille, or redirecting air flow from one diffuser to another.

Members of the Johnson Controls family work together to create a world in which technology and humanity work in harmony. Their global operation encompasses research, manufacturing, and sales of automotive systems, vehicle components, and building controls. They do their part to add value at every step in the process of creating the right technologies for the right applications.