SCHNEIDER ELECTRIC 30490 PNV1021 Pneumatic Diaphragm for MK-2690, MK2400, AL161-4

Diaphragm AL-161-4, MK-2690 & MK-24

The Schneider Electric 30490 Pneumatic Diaphragm AL-161-4, MK-2690 & MK-24 fits the following models:

The Schneider Electric 30490 PNV1021 is a pneumatic diaphragm for use with the AL-161-4, MK-2690 and MK-24 units. The pneumatic control system uses air pressure to operate either proportional or binary actuators. Sized for easy storage and portability, it has a 3 m cable with quick connect couplers that can be attached to any of the many accessories that are available.

The AL-161-4 contains a diaphragm to operate the valve for the Air. The MK-2690 & MK-24 requires a pneumatic diaphragm (AL-161-4) to be installed on the Air output port side of the valve.

The replacement Diaphragm for MK-2690, MK2400, AL-161-4 (470 dosimeter) also work for APW-8255, ACB3203, BCA30D2, AAE3300, CA33200, BCA3402 & AL-165.

Pneumatic diaphragm 130x170mm for MARK-2690, MARK-2400 & AL-161-4.

Have you used the Schneider Electric 30490 PNV1021 Pneumatic Diaphragm for MK-2690, MK2400, AL161-4 today?

Pneumatic diaphragm in good conditions, all very well, does not smoke. The bottom is a bit rusted, but I hope it will not interfere with the work diaphragm. Diaphragm was for repair of the pneumatic valve MK-2690.