HONEYWELL Q347A1004 Q347A1004 IGNITOR SENSOR FOR USE W/S87C,D,E,K

IGNITOR SENSOR FOR USE W/S87C,D,E,K

Ignitor sensor for use w/ S87C,D,E,K. Positive stop screw terminal type. End connect. 10 ft. lead wire. Temp rating: 1000F.

HONEYWELL Q347A1004 Ignitor Sensor Sensor for use w/S87C,D & E Outdoor Gas Fireplaces.

The Honeywell Q347A1004 Ignitor Sensor is a programable replacement part for older units. This ignitor was created for use with the S87C, S87D, S87E and S87K heating systems. It features an increased life span and can be reprogrammed to a more efficient holding cycle when necessary.

Great for retrofitting to older furnaces. Compatible with Honeywell electronic ignition systems with sensor ports S87C, S87D, S87E, S87K and also compatible with Micro Flame Sensing Switch (MFS-1) furnaces.  With height of 5" and length of 39", this ignitor sensor fits in most furnaces. It features a white body that is made of plastic material. This ignitor sensor is capable of detecting pilot flame on natural gas (4MPa), propane (2.6MPa) and heating oil (4Mp). It weighs 0.

The Honeywell Q347A1004 Ignitor is a replacement for the following model numbers: S87C,S87K,S87D,S87E.. This ignitor combines three functions in one component: flame indicator, heater element and gas valve. It also has a fixed RED LED light that illuminates when electrodes are passing sufficient current to ignite pilot but the pilot is in MANUALLY ON position or pilot is off . When the ignitor receives power, and the gas valve opens because of this magnetic field, the spring-loaded armature instantly opens creating a gap on both sides of the heater

The Honeywell S87C1004 Ignitor Sensor for use with the 86XR and 86XR2 Series furnaces is a good replacement for the older T87 and C87 for dash mount.

The Honeywell Q347A1004 Ignitor Sensor is used with some models of wood-fired water heaters, and it supplies the pilot lamp.