HONEYWELL Q7800B1003 Q7800B1003 SUBBASE FOR 7800 SERIES RELAY MODUL

SUBBASE FOR 7800 SERIES RELAY MODUL

Subbase for 7800 Series Relay Module

The 7800 Subbase is for use with the Honeywell 7800 Series Relay Modules. The subbase is designed to convert a bottom mounted module into a wall mount or ceiling mount as required by commercial applications

This subbase is used in conjunction with a 7800 series relay module. This subbase allows the 7800 series relays to be mounted in several different ways or orientations, and is low profile, so it can be used in many different applications. TECHNICAL SPECIFICATIONS

Designed for use with the Honeywell Q7800 Series Relay Modules, this subbase is capable of holding up to four modules. Constructed from hard-wearing polycarbonate and aluminum, this subbase is suitable for industrial environments.

The Q7800B1003 subbase system allows any Q7800 relay module to be mounted onto a simple base to extend the relay's cable length. It also allows multiple Q7800 modules to be stacked on a single subbase. The base accepts up to four sensors and up to three relays. There are five I/O connectors (for add-on boards).

The Q7800B1003 base mounts the 7800 Series Relay Modules by Honeywell. The 7800 series relay modules are used to monitor and control industrial, commercial, and residential systems.

HEAT, COLD, HUMIDITY, AND WATER TEMPERATURE MONITORING Relay Base provides both 4-20 mA and 0-10V outputs with current limiting. The base module is designed to accept one or two 7800 series relay modules.