Micro-C Backbone Kit, MFG# 000-10760-001, includes network power cable, 15 N2K cable, 3 ea. T connectors, 2 ea. terminators.
The RAM-N2K-Micro-C is an NMEA 2000 backbone kit containing: data power cable, 4ft N2K coaxial cable, three T-connectors and two terminators. It is designed for use with the entire line of marine NMEA 2000 networks for power sharing, redundancy and additional communications capabilities.
The NMEA 2000 Micro-C Network Backbone Kit is designed for heads mounted displays, vehicle tracking systems and other auxiliary equipment with a network connectivity requirement. The kit includes a power cable, 4.5 meter network cable, 3x T-connectors, 2x terminators.
The RAM-N2K-C116-UN10 micro-C backbone kit contains components needed for a complete installation of a micro-C network. The kit includes: (1) T7 male connector for connecting the backbone cable to the NMEA 2000 data bus; (1) 11 in. N2K backbone cable; (3) T7 male connectors to connect individual devices to the backbone cable; and (2) terminators for use at the ends of the backbone cable.
If you need to set up a network over long distances, this kit will get you started. The backbone kit contains 4.5m of 15-conductor NMEA 2000 cabling and a power cable. Three T-connectors and 2 terminators allow the creation of three networks over distances as great as 3 meters (10 ft).
With the MICRO-C Backbone Kit's small size and low cost enables you to network multiple devices across diverse platforms for a single interface. The kit is designed to work with virtually any device requiring only DC voltage, and can be used in harsh conditions due to it's IP67 (Ingress Protection) rating.
This Micro-C backbone kit is the ideal method of wiring audio and video devices for a class D audio solution in any vehicle. The 2.5" x 4.5" x 1.5" Micro-C terminal block includes six jacks for easy setup, extension and power wiring compatibility to a power supply or battery pack. It also has a cigarette Lighter power connector to easily plug into your car's accessory socket for mobile device integration that enables sound systems in older cars (4 ohm min).
This kit comes with everything you need to get your network up and running. And all the extras are stored together in a nice plastic carry box. Its micro-c backbone design greatly reduces installation time and cost by cutting the number of wires needed to connect serial devices to a fraction of previous installations.
Free Shipping
In stock
