United Aqua Group 013428F Limit Switch

Limit Switch

A limit switch is a device used to prevent machines, components or processes from being operated beyond a predetermined point or position. In industrial applications, it is often called a limit switch, safety switch, stop switch, emergency stop or gate valve.

Aqua-Trol’s United Aqua Group 013428F Limit Switch is used as a water shut off device in commercial and residential applications. This stainless steel construction with a "N" suffix provides excellent corrosion resistance.

The United Aqua Group 013428F Limit Switch is used on the Aquarium pump. The switch controls the aquarium's water flow. It is a momentary, normally open, and snap action switch that has an adjustable set screw for setting the flow control point. The Main control of the Aquarium pump is located on top of the pump unit, where it is easily accessible.

UL, CSA, and CE certified. 3/2 Normally Closed Waterproof Switch with Float. The F1D3428 is a float operated normally closed (NC) limit switch that switches at a preset water level. The float is activated by water that rises above the top of the float pin when the switch is open. When the float reaches its set point, it closes the contacts and operation stops. This switch can be operated in a vertical or horizontal position and can be used in either fresh or saltwater environments.

The United Aqua Group 013428F Limit Switch is a spring return, normally open, single pole and single throw, non-latching, tandem toggle switch. It features a carbon steel body and silver contacts.

The Metal NEMA 4X Rated, 2-Position Inverted Pushbutton Switch is designed for machine control. The switch activates a limit control relay (not included) when pressed. It has two leads, a common and normally open contact; current rating is 0.125A at 120VAC or 24VDC. It has a 1/4? terminal block with 10-32 screw terminals and is UL listed and CSA certified for safety.

The United Aqua Group 013428F Limit Switch is a standard limit switch that can be used in an array of applications. This switch can be used for various functions including full/half travel, two-hand control, or automatic control. The quality of this product is guaranteed by Neuco Inc. Please get in touch with us if you have any questions about our product.

The 013428F is a single-pole, double-throw (SPDT) Limit Switch with 52 Ohm and 10 Ohm compression spring for use with an actuator that is normally open or normally closed. It mounts in a circular 24.1 mm electrical box and has an operating force of 12 to 45 N (2.7 to 8 lb). The 013428F is often used in applications where the switch must be set on before being turned off.

United Aqua Group 013428F Limit Switch is installed on the motor of a pool pump, spa pump, air conditioner and other similar water circulating equipment. The contact terminals of the switch are connected to the wire leads of a solenoid valve that is opened and closed by an electrical signal. When the contacts are closed, current is permitted to flow through the circuit to power the pump. When energized, the limit switch sends a voltage signal to the pump motor which shuts it off if a down stream nozzle gets too close to avoid damage.

Costing less than its competitors, the United Aqua Group 013428F Limit Switch is one of the most reliable and durable switches on the market. It has a removable cap that prevents leaking and allows easy access to the spring mechanism, which means you will be able to install it as quickly as possible. The spring can be adjusted in order to prevent damage or injury that may occur during installation. While this option may not have all of the bells and whistles like some of its competitors, it is the preferred model for serious contractors who need a reliable piece of equipment.