RAZOR-BACK 760-4118000 MATTOCK PICK NO 5 FGL HDL RB

MATTOCK PICK NO 5 FGL HDL RB

The Razor-Back 760-4118000 Mattock Pick No 5 FG is a high quality mattock pick that is commonly used for field clearing trees and brush. It features an 18 in. long handle and a 2 ft. long, forged steel head with a 90 degree chisel edge and a mattock point on the opposite side.

The 760-4118000 Razor-Back Mattock Pick No. 5 FLD is a wooden handled mattock or pick axe designed for clearing brush or demolishing rocks. It features an 11 inch double sided blade with black vinyl grip and wood handle.

Razor-Back's MATTOCK PICK is one of the most useful tools in the excavator. It has two pick heads, this allows the operator to use the tooth here for ripping and tearing if necessary, while using the other side for finer more delicate work. The rake head on top of the mattock pick is typical of many rakes used in the mining industry.

Razor-Back mattock pick. No. 5 Fiberglass handle length 16-3/4", overall length 29-1/2". Target head weight 18 lb. Center blade width 9". Maximum center blade projection 4". Target head thickness 1/4". Overall pick thickness 2", width of top blade 11/16", width of bottom blade 7/16", tooth height 3-1/2";;;

The RAZOR-BACK series includes a variety of short mattock picks that can be used as a substitute for a pick head on any RAZOR-BACK tool. This pick has been designed to have the perfect weight and strength needed to smash rock and debris at the bottom of a ditch or along an existing water line. This is a single handpick only, not a handle and handle assembly.

Designed to pierce rock and concrete as well as to lift without tearing or gouging, the mattock pick with non-threaded handle is great for prying, rock busting, rock chiseling, boulder moving and grading. May be set into wooden handles with a bolt pin insertion.

Over the years, the Mattock has been a fearsome tool for clearing both groundcover and rocks, chopping through roots and reaping large plants. Forged from a single piece of hot rolled steel, its strong pick end is designed to cut through groundcover while its 3-sided chisel end allows larger plants to be pulled from the ground. The handle end features a contoured soft grip surface that gives improved grip and control, even in wet or muddy conditions. Comprehensive instructions are included with each mattock to provide the user with specific information on how to use this tool with maximum effect.

Designed for skid row sidewalks, the Mattock pick is a rugged tool that makes short work of concrete, brick and roof shingles. The pick feature splits rock into small pieces, while the non-sharpened, pointed end is ideal for smearing in cracks to loosen stubborn material. Razor-Back's exclusive narrow head design allows the tool to pass through tight roof cracks and enter areas thought unreachable by similar tools. The Mattock pick works equally well when used as a shovel in tight spots. The 7-foot long handle can also be shortened in two places by using the extra holes for customizing your

K12-HYDAC, for picking and heavy demolition work. OAL: 7 1/4" (18.4 cms). Blunt pick OD: 1 9/16" (4.3 cms). Sharp pick OD: 1" (2.5 cms). Rocker end: OD: 11/16" (1.7 cms). Handle: adjustable fiberglass reinforced nylon with steel wedge plate. Includes hard case.

This pick comes standard with a rubber grip handle for maximum comfort and control.

The pick is a tool with a metal head mounted on the end of a long handle. It is used to break up hard ground or to loosen soil.