Reznor 194803 VENTER ISOLATER BUSHING VENTER ISOLATER BUSHING

VENTER ISOLATER BUSHING

These Venter isolater bushings are 4 3/4 inches long and are designed to replace your old, worn out, failing or missing Venter Isolater Bushings.

The Venter Isolater Bushing isolates the tailpiece and venter from the wall. This bushing is used between a water pressure riser and a tailpiece on domestic hot water heaters. The Venter Isolater Bushing is made for use with copper pipe, comes in 3/8 inch-16 inch sizes, and 2-3/8 inch OD-10-1/4 inch ID.

The Venter isolater bushing kit is a must have for any Venter RV collector.

A venter isolater bushing is used in HVAC (heating, ventilation and air-conditioning) to connect ducts to registers and diffusers.

Replaces the venter isolater bushing in your refrigerator.

Designed to vent two lines of one- or two-story residential construction simultaneously, the Venter Isolater features two 10-ft. horizontal sections and a single 12-in. square vertical section. It vents hot and cold air through a single four inch pipe from the attic space to a roof exit, eliminating the need for separate supply and exhaust venting. The multi-section design eliminates roof flashings for easy installation on all types of roofs.

The Venter Series is designed to provide a basic system solution for all standard applications such as kitchen hoods, under counter ventilation and other clearance-limited installations. This model of Venter Series is with 15" dia. x 10' length blower and galvanized steel duct. It also includes 6" dia. x 6' length galvanized flex duct with elbows and connector.