Eon ECM Motor 1/2 hp
The Eon ECM Motor 1/2 hp is for a very select group of home owners who demand nothing less than nothing but the best. i.e.: sound proof , clean burning, trouble free. We did not even have a motor without a fan shroud, or have a motor that did not have a ECM feature. We started using this same motor in 1989 and have been proving it's great performance ever since.
The RHEEM Eon ECM Motor 1/2 hp operates independently of the load so it can adjust to changing conditions. It offers unique, room temperature diagnostics-based protection, so you have an early warning system for any problem that may arise. Features
The Rheem 51-104304-06 -Ruud Eon ECM Motor 1/2 hp is designed for a variety of applications, including air handlers and wall hung floor units. This unit has a power factor of 0.82 and a thermal protector. It also features a delta T of 10°, 115/60/1 V system voltage, and a permanently lubricated pump. The motor has a 2250 rpm shaded pole base RPM speed, and 208-230/460 volts full load current. It has an amp draw of 3.8/, and comes with a NEMA 1 location base.
The Ruud Eon ECM 1/2 hp cast motor delivers up to 30% more efficient motor operation and increased horsepower. This cast motor will provide quiet, reliable and efficient cooling and heating for your home. With this combination of technology and engineering, the rotation rotation speed (RPM) is electronically controlled, which enables the motor to match the appliance's needs for heating or cooling.
The Rheem Ruud EON ECM-1/2-hp motor is suitable for use on all gas and liquid water heaters and will run approximately 3000 hours. This unit makes a great replacement or new installation on natural liquid propane (L.P.) and natural gas water heaters.
The ECM motor provides energy efficient and reliable performance the way it's supposed
to: year after year. Unit is engineered and designed by Rheem, ensuring maximum reliability and minimal operating sound. EMI/RFI shielded enclosure for reduction of electrical interference. System
voltage: 120/240-Volt; Power
factor: .95; Power demand at rated load
Rheem has collaborated with other industry leaders to create the future of energy efficient water heating. Rheem's new 1/2 HP ECM motor is ultra-efficient, quiet, and comes with a 10 year limited warranty. This 1/2 Hp Immersion Element contains an internal stator, which magnetically rotates the copper alloy elements within the tank producing heat at approximately 24 volts. Rotating at 3600 RPM, this system provides fast heat up times, while providing comfort-level temperatures through the primary heating circuit. This unit is capable of producing either 230 or 460 watts of heat.
The ECM motor can run 3,100 hours before needing to be replaced, and is designed for efficiency and improved performance. It runs more quietly than other motors and also runs cooler, which helps it last longer
A higher efficiency ECM motor operates at up to 70% AFUE efficiency. Airflow sensor monitors indoor humidity for energy efficiency. For added convenience, the 2-stage variable electronic direct spark ignition system produces a consistent flame pattern at all times.
Technical Specifications
Built-in diagnostics shut down the system if there is a problem making repairs easier
Designed for home comfort, the 12 SEER Rheem Ruud system gives you more of what you’re looking
for: more energy efficiency and more energy savings, while providing greater longevity and durability. Your new system will lower your energy bills and increase the comfort of your home.