Ignitor Retrofit Kit
The Ignitor Retrofit Kit is for older Ruud units that were manufactured before 2005 and have the ignitor installed on top of the burner. The kit includes an ignitor, a Carb Spark Module (CSM) with a new platinum spark electrode, a plug wire to connect the CSM to the ignitor, and a screwdriver. To complete the installation, turn off the circuit breaker to lower the gas pressure, disconnect the existing wires from the brass terminal of the old ignitor, and attach them to those of the new one. This kit also requires replacing part of your gas control valve.
Ignitor Retrofit Kit is used to convert a pilot-light system to an electronic ignition system. It includes the Ignitor Electronic Ignition System with GAS OUTLET-ABN, and Manual Modulating Pilot (SP12145RM) with LIGHT-PILOT-LITE.
The Ignitor Retrofit Kit includes the fuel ignitor, wire harness and thermocouple required to convert your under the counter fuel-fired appliance to an electronic ignition.
Take the guesswork out of installing and using a two-stage gas furnace. The Ignitor Retrofit Kit from Rheem simplifies installation by communicating with both the new thermostat and your existing home wiring. It features wall plates, low voltage wiring, color coded wires and terminals for quick hook-up, and a latching pilot assembly that makes it reassuringly safe to use in areas where children or pets are present.
Flame on. Rheem has designed an Ignitor Retrofit Kit to fit select outdoor gas furnaces. The simple add-on makes it easy for you to get started saving energy and ensuring your equipment is working safely. The Ignitor Retrofit Kit is the perfect way to keep your outdoor gas furnace running smoothly and efficiently, while cutting down your energy costs.
The ignitor retrofit kit is used for installing a gas spring ignition and bump fire kits to the following non-ignition capable models:
RHEEM SP12143K -Ruud Ignitor Retrofit Kit for Ruud Furnace Models 7AB-240-4EF, 7HDL-240-4BH, 7EB-240-4EB, 5AZA7F10A; RHEEM Gas Furnaces HDLM6 and HDLB6