RIB RELAYS 126530 Functional Devices (RIB) S Enclosed Relay 30Amp DPST + Coil Side Override 120

DPST ENCLOSED RELAY 30 AMP WITH 120VAC COIL

Our DPST Enclosed Relay is suitable for simple industrial applications. This enclosed relay has NSF-bronze contacts and a 12Vdc coil, 120Vac coil/110Vac available. A precise long lasting contact life of more than 10 million operations ensure relays longevity. It is shock resistant with double poles, and can be used in an enclosed weatherproof housing.

The S-EN30 DPST Enclosed Relay delivers 30 amps/250VAC2N/60Hz isolated power and features a high duty cycle as well as a built in coil overload protection. The product has a weatherproof design for long service life and is recessed into standard single gang box provides wire access from the front. It has a 3PDT trigger with 250VAC coil voltage. The durable enclosed design protects against tampering, dust and moisture.

The RIB 126530 30A 120V DPST ENCLOSED RELAY is an electronic switch device that senses the voltage between the coil connections. If there is power on at both connections, the relay will complete the contacts linking the two together and will maintain a connection until the current falls below a preset value or current drain. Operating as a switch, it allows 120 VDC to pass from one connection to another when operated by an external control circuit.

RIB RELAYS 126530 Functional Devices (RIB)  S Enclosed Relay 30Amp DPST + Coil Side Override 120VAC The RIB Relays S series rugged, durable, reduced energy usage combination circuit protectors utilize dual voltage input and are rated up to 4kAIC for personal protection applications. Internal transistors eliminate the possibility of electrical shock in the event of short circuit. The complete control circuit is fully enclosed in a heavy-duty polycarbonate resin case with aluminum screw-on cover over the actuator switch and interlocking dust boot.

The RIB Relays S series 126530 Relay is a 30 Amp 5 wire Non-Locking DPST Toggle with 120v Coil. The RIB Relays S series 126530 is housed in a compact rectangular plastic DIP package that protects the relay from dirt and moisture. The combination device has nonlocking contacts that can be coil operated or normally open. The 126530 relay features a dual coil latching feature with an independent coil turn on to allow the coil to be energized first before the contact switch being energized.

RIB Relays RIB S Enclosed and Side Override DPDT Relay 120 VAC 30A PCB Mount Part No. ? RIBS215LW30C

The RIB 126530 is a 30 amp, 120V resistor with a dual pole single throw (DPST) center off toggle and an externally controlled coil. A DPST switch contains two separate circuits that operate from one common terminal. Like other DPST switches, the dual pole single throw contacts of the RIB 126530 are wired in series to form the equivalent of a single pole double throw switch. The relay contacts are of the normally open (NO) type, with the coil normally supplying power to its control circuit. When the toggle is in one position, power is supplied to one side of the control circuit