RIB RELAYS 65257 Functional Devices (RIB) Panel Relay 4.000x1.275in 15Amp SPST-NO + Override

4 Track-Mount Relay 15Amp SPST-NO +

The RIB RELAYS 65257 functional devices contains 4 track-mount relays - 1NO + 3NC, 4 Terminal 1.275in.x4.000in Front Mounting Industrial Relay # 15Ammp 12Volt SPST-NO + Override.

The RIB Panel Relay 4.000x1.275in 15Amp SPST-NO + Override is a track-mounting switch for control of low voltage circuits. It is a rugged panel mounted SPDT switch made from molded plastic and protected by a metal cover. The circuit is connected to two terminal tabs at the rear of the enclosure, thus permitting connections inside or outside the enclosure. This unit has an auxiliary aux contact that closes when the switch closes, and both contacts are arranged in parallel so that either can operate the load without breaking ground. This unit has an auxiliary aux contact that closes when the

The 65257 4 Track-mount relay is a 60V panel relay that includes a 3Amp / 250VAC / 125VDC Override, and is NEMA 1 rated.

Replacement Relay for Polyphaser 4 track mounted relays

The RIB Relay 65257 Solid State Relay is intended for use in industrial control applications where remote control of electronic equipment is required. This cover-mounted relay uses a common wire in conjunction with an electromechanical switch in its construction and is rated to 15 amp, 120/240 Volts AC and the contacts are SPDT (Single Pole, Double Throw). The relay has a gold plated male blade terminals and a black, molded plastic housing.

No mounting rails? No problem! With our exclusive, patent pending, Rail-less mounting system, you can securely mount the relay to any flat surface with screws!

These relays are typically used in circuit protection schemes. The Relay is designed to trip with current flow up to 15Amps at 250VAC. The Relays' coils are rated for 25VDC @ 5Amp or 30VDC @ 4Amp.

The Panel Relay can be used as a general purpose relay wiring into the motor control circuit. The device is designed with a variety of mounting options, and features Tamper Switch to provide security against tampering and unauthorized access. The relay is suitable for AC and DC applications and is backed by a 5-year warranty on materials and workmanship for added reliability during use.

The RIB Relays 4-channel relay panel is a lightweight and portable option to integrate into your wiring system. The panel contains 4 relays and terminal connectors to combine, split and/or tap circuits by utilizing the included terminal blocks and spade terminals. Three LED indicators provide operational feedback for each channel; the status of the switch, the circuit position and power on.

The RIB series relay has a molded in mounting base with industry standard 2-hole electrical knockouts in the standard 3/4 in. pattern. The base is designed to allow for easy attachment of any Powergrip® Switch. As an enclosure, the RIB is ideal for use in commercial or industrial applications where A/C power may be involved

Electrical

Two Over-Ride Positions