HONEYWELL RP471A1002 RP471A1002 SNAP-ACTING PNEUMATIC SWITCHING REL

SNAP-ACTING PNEUMATIC SWITCHING REL

When you need a small, tough pneumatic switch that responds to pressure and not just touch, choose Honeywell's Snap-Acting Pneumatic Switching Relay. The non-corrosive double-filament design takes moderate pressure for activation. The 11/2" x 3" direct mounted packaging makes installation easy. It can be used in pressure ranges up to 145 psi with a switching time of 25 microseconds.

The Snap-Acting Pneumatic Switching Relays family is available in solid state contactors and SPDT, DPDT or DPST switches for both 4 to 20mA and 0 to 10V actuation. They are suitable for actuating valves used in applications such as air relief, dust collection, cooling water venting, exhaust fan motor control, etc.

This Snap-Acting Pneumatic Switching Relays are reliable switching relays designed to perform for many years. The unit is of low cost and is normally closed type.

With the innovative RP471A1002 Snap-Acting Pneumatic Switching Relay series, Honeywell has provided an off-the-shelf, high performance solution for a wide range of pneumatic switching applications.

The RP471A1002 is a snap-acting pneumatic switching relay that switches high voltage, low current. It contains an integrated coil and diaphragm with a 25mm (1 in.) stroke and includes gold terminals and mounting clips. The coil and diaphragm are both bonded to the valve body using two acrylic adhesive strips. There is no additional external mounting hardware required, which greatly reduces assembly cost.

The RP471A1002 RP471A1002 is a snap-acting pneumatic switching relay that includes high on-resistance for high current applications. Designed for general purpose applications, this relay’s small diameter makes it ideal for use in confined areas. The compact size also improves wiring layout and allows the relay to be embedded into equipment for enhanced control, thereby increasing overall safety and efficiency. The weather resistant thermoplastic housing ensures protection from extreme temperatures.

The Honeywell RP471A1002 is a snap-acting pneumatic switching relay. It is designed to directly control the operation of SNAP cartridge valves. The relay mounts into NEMA 4X/IP65 enclosures. A wired coil terminal is included in the relay base for powering and controlling the relay coils separately.