York 142627 S1-024-25810-000 1/10HP 208-230V 825RPM 48 Mtr

MTR,COND,1/10,825,CW,230-1-60

The York 1/10 HP 825 RPM Condenser Bearing Motor is designed for horizontal or vertical installation. The S1-024-25810-000 motor has a C-Face mounting flange and can run on 208 to 230 volts.

The YORK 1/10 HP 208/230-1 Phase Condenser Motor is full voltage phase wound totally enclosed fan cooled (TEFC) motor. The TEFC enclosure design helps protect the motor from dust, dirt, oil & grease and other contaminates that may be present in the air. This type of motor is used for applications like blowers, conveying belts, vacuum pumps, line shafts, gensets, drossars, shapers, compressors, roll slitting equipment, textile machinery & pumps.

This is a motor for replacing a 1/10 HP motor after a small amount of use. A starter and a capacitor may be necessary depending on the power supply. 825 RPM, 230V, 0.145A, 1/8HP

The York 1/10 hp Condenser unit with built-in scroll compressor has a high efficiency scroll motor. This Energy Star rated unit is fully enclosed and has no exposed cooling lines, for added safety. The external fin stabilizer tray allows you to configure this compressor for horizontal mounting.

Our York 1/10HP 208-230V Condenser Fan has an adjustable speed of 825RPM to 1025RPM.

The York 1/10 hp 208-230V 825RPM fan-cooled motor that was designed for commercial and industrial applications and has a power factor of 0.9. This motor has a phase grouping of A and B and comes with Carbon brushes.

3-Phase 208/230V Class II, 1/10 HP, 48 Mtr. Motor. Number of Insulation Class F. Voltage Rating 234/460 Volts. Synchronous Speed 825RPM. Ball Bearings Ball Bearings: S1-024-25810-000